Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
spackle42
Posts: 137
Registered: ‎05-12-2013
Message 1 of 3 (138 Views)
Accepted Solution

Double Hem Corner

138 Views, 2 Replies
10-03-2013 03:36 PM

Ok, so I've worked out how to use an offset and a corner seem to mitre my hem corners, but the process breaks down when I attempt it on a double hem.  I'd rather avoid the contour flange method, has anyone come across another way of doing this?



Justin Smith

Inventor Pro 2015 SP1
HP Z400 Workstation
Intel Xeon W3565 @ 3.20GHz
12Gb RAM
Win 7 64 Pro SP1
Spacepilot Pro v3.17.4

Found it. Form each hem out of two single hems.  Form the larger out pieces first, and corner seam them, then do the same for the smaller inner hems :smileyvery-happy:

 

File attached for anyone interested.

Distinguished Contributor
spackle42
Posts: 137
Registered: ‎05-12-2013
Message 2 of 3 (132 Views)

Re: Double Hem Corner

10-03-2013 04:02 PM in reply to: spackle42

Found it. Form each hem out of two single hems.  Form the larger out pieces first, and corner seam them, then do the same for the smaller inner hems :smileyvery-happy:

 

File attached for anyone interested.



Justin Smith

Inventor Pro 2015 SP1
HP Z400 Workstation
Intel Xeon W3565 @ 3.20GHz
12Gb RAM
Win 7 64 Pro SP1
Spacepilot Pro v3.17.4
*Expert Elite*
JDMather
Posts: 28,233
Registered: ‎04-20-2006
Message 3 of 3 (121 Views)

Re: Double Hem Corner

10-03-2013 05:56 PM in reply to: spackle42

Something like this?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.