Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
159 Posts
29 Kudos
Registered: ‎08-22-2012
Post 1 of 3
Accepted Solution

dimensioning to Z shape implied intersections

210 Views, 2 Replies
11-13-2012 08:13 AM

Looked through the help and found nothing, then did a search here and found nothing.

I am needing to put a horzontal dimension from the implied intersections of a "Z" shape.

In the attached screen shot, I have a question mark at the dimension I'm needing.

I have tried the RMB/Intersection in different ways, but none giving me the dimension

I'm needing.

How do I go about getting this dimension?

Thank you very much for your help.

Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013

To accomplish this task do the following:

  1. Select Line 1
  2. RMB > Intersection
  3. Select Line 2
  4. Select Line 3
  5. RMB > Intersection
  6. Select Line 4

intersection.JPG

Distinguished Mentor
515 Posts
201 Kudos
Registered: ‎10-22-2008
Post 2 of 3

Re: dimensioning to Z shape implied intersections

11-13-2012 09:20 AM in reply to: sps_cad_guy

To accomplish this task do the following:

  1. Select Line 1
  2. RMB > Intersection
  3. Select Line 2
  4. Select Line 3
  5. RMB > Intersection
  6. Select Line 4

intersection.JPG

Mike Patchus

Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below. :smileyhappy:
Distinguished Contributor
159 Posts
29 Kudos
Registered: ‎08-22-2012
Post 3 of 3

Re: dimensioning to Z shape implied intersections

11-13-2012 10:16 AM in reply to: mpatchus

Perfect!

Thank you very much for your help.

Lenovo Think Pad
Windows 7 SP 1
64 Bit.
Inventor 2013
ACAD Mechanical 2013
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post