Inventor General Discussion

Inventor General Discussion

Reply
Member
vendettathegreat
Posts: 4
Registered: ‎01-23-2014
Message 1 of 8 (219 Views)
Accepted Solution

Dimensioning Spheres

219 Views, 7 Replies
01-23-2014 08:20 AM

I am trying to change the dimensions of a sphere to make it oblate, however, since it is a result of a Revolution, I cannot edit it. What should I do?

or this?oblate 2 .png

*Expert Elite*
JDMather
Posts: 28,014
Registered: ‎04-20-2006
Message 2 of 8 (208 Views)

Re: Dimensioning Spheres

01-23-2014 08:51 AM in reply to: vendettathegreat

Edit the sketch.

 

Attach your file here, an image, a url - something to indicate your design intent.

Indicate what version of Inventor you are using.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
vendettathegreat
Posts: 4
Registered: ‎01-23-2014
Message 3 of 8 (202 Views)

Re: Dimensioning Spheres

01-23-2014 09:11 AM in reply to: JDMather

JDMather wrote:

Edit the sketch.

 

Attach your file here, an image, a url - something to indicate your design intent.

Indicate what version of Inventor you are using.



JDMather wrote:

Edit the sketch.

 

Attach your file here, an image, a url - something to indicate your design intent.

Indicate what version of Inventor you are using.




*Expert Elite*
JDMather
Posts: 28,014
Registered: ‎04-20-2006
Message 4 of 8 (197 Views)

Re: Dimensioning Spheres

01-23-2014 09:18 AM in reply to: vendettathegreat

Something like this?

oblate.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
JDMather
Posts: 28,014
Registered: ‎04-20-2006
Message 5 of 8 (181 Views)

Re: Dimensioning Spheres

01-23-2014 09:53 AM in reply to: JDMather

or this?oblate 2 .png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
vendettathegreat
Posts: 4
Registered: ‎01-23-2014
Message 6 of 8 (136 Views)

Re: Dimensioning Spheres

01-24-2014 04:00 AM in reply to: JDMather
I wish to know how you did this to the part.
*Expert Elite*
JDMather
Posts: 28,014
Registered: ‎04-20-2006
Message 7 of 8 (127 Views)

Re: Dimensioning Spheres

01-24-2014 05:43 AM in reply to: vendettathegreat

Attach your *.ipt file here.

I have no idea what version of Inventor you are using.

I have no idea of your dimensions intent.

 

I have already requested this information in a previous response in this thread.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
vendettathegreat
Posts: 4
Registered: ‎01-23-2014
Message 8 of 8 (86 Views)

Re: Dimensioning Spheres

01-26-2014 10:15 PM in reply to: JDMather

Here you go.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!