Inventor General Discussion

Inventor General Discussion

Reply
New Member
carey.olson
Posts: 1
Registered: ‎07-05-2011
Message 1 of 3 (745 Views)

dimension from quadrant of circle to appt intersection on a cirlce

745 Views, 2 Replies
01-10-2013 12:34 PM
 
*Expert Elite*
Cadmanto
Posts: 3,356
Registered: ‎12-07-2011
Message 2 of 3 (737 Views)

Re: dimension from quadrant of circle to appt intersection on a cirlce

01-10-2013 12:56 PM in reply to: carey.olson

Carey,

Welcome to the forum.

Take a look at this link.  See if it helps you.

http://forums.autodesk.com/t5/Autodesk-Inventor/Tangent-Dimensioning-of-Arcs/td-p/3317169

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

*Pro
sbixler
Posts: 1,968
Registered: ‎09-15-2003
Message 3 of 3 (702 Views)

Re: dimension from quadrant of circle to appt intersection on a cirlce

01-11-2013 04:40 AM in reply to: carey.olson

My solution below is in Inventor 2013, but since you didn't tell us what version you're using, I don't know if you can open it.

 

This isn't as easy as it ought to be, but here's how I did it (see attached).  I created a view sketch, projected the two arcs, and created an arc concentric with the big "circle" as an extension to show the complete circle (set to the Dimension layer).  I then put in a Sketch-Only line between the arc centers, then a normal line tanget to the sketched arc and perpendicular to the previous line.  This last line is purely for something to dimension to.  I exited the sketch, then created a dimension between the tangent line just placed and the quadrant of the small arc.  Then I went back into the sketch and changed that tangent line to Sketch Only so it is not visible.

Sam B
Inventor 2012 Certified Professional

Please click "Accept as Solution" if this response answers your question.
-------------------------------------------------------------------------------------
Inventor Professional 2013 SP1.1 Update 1
Windows XP Pro 32-bit, SP3
HP EliteBook 8730w; 4 GB RAM; Core™ 2 Duo T9400 2.53 GHz; Quadro FX2700M
SpaceExplorer/SpaceNavigator NB, driver 3.7.18
still waiting for a foreshortened radius dimensioning tool in Drawing Manager

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.