Inventor General Discussion

Inventor General Discussion

Reply
*Caldwell, Larry
Message 11 of 14 (55 Views)

Re:

11-05-2002 04:27 AM in reply to: *Mears, Brian
Which one is the arc length? Looks like the leader dim is the radius, no? If
you change the angle, it still keeps the same dim.
~Larry

"Sean Dotson" wrote in message
news:F7066DFE262584F8DDEDF2584945C0F0@in.WebX.maYIadrTaRb...
> oops hit enter too soon...
>
> The vertical line shows the arc length
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Sean Dotson" wrote in message
> news:381D66E87B7A7998CE253DC130329302@in.WebX.maYIadrTaRb...
> > There is an example in Cf on how to do it in part mode..
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Drew Fulford" wrote in message
> > news:6CA593A9E0B4568E85095008E333208F@in.WebX.maYIadrTaRb...
> > > In an IDW its as easy as a RMB before placing the dim,
> > >
> > > In an IPT its not doable without math formulas
> > >
> > > - drew
> > >
> > > --
> > > Drew Fulford B.A.Sc. Systems Engineer
> > > Solid Caddgroup Inc. Burlington, Ontario
> > > Tel: (905)331-9670, Fax: (905)331-7280
> > > Corporate: http://www.solidcadcam.com/
> > >
> > > Member of the Autodesk Discussion Forum Moderator Program
> > > Visit my MCAD website @ http://www.mymcad.com/
> > >
> > >
> > >
> > > "Brian Mears" wrote in message
> > > news:57DE2AC54F66919B2C27918860694D40@in.WebX.maYIadrTaRb...
> > > > Is it possible in Inventor to dimension an arc's true length?
> > > >
> > >
> > >
> >
> >
>
>
*Dotson, Sean
Message 12 of 14 (55 Views)

Re:

11-05-2002 04:30 AM in reply to: *Mears, Brian
The vertical line is the arc length in both examples. In the first example
change the angle or radius to get the length. In the second change the
length or radius to get the angle...

--
Sean Dotson, PE
http://www.sdotson.com
remove all #s from email
-----------------------------------------
"Larry Caldwell" wrote in message
news:3632CB02BE858051864756CCC8D2D404@in.WebX.maYIadrTaRb...
> Which one is the arc length? Looks like the leader dim is the radius, no?
If
> you change the angle, it still keeps the same dim.
> ~Larry
>
> "Sean Dotson" wrote in message
> news:F7066DFE262584F8DDEDF2584945C0F0@in.WebX.maYIadrTaRb...
> > oops hit enter too soon...
> >
> > The vertical line shows the arc length
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Sean Dotson" wrote in message
> > news:381D66E87B7A7998CE253DC130329302@in.WebX.maYIadrTaRb...
> > > There is an example in Cf on how to do it in part mode..
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > remove all #s from email
> > > -----------------------------------------
> > > "Drew Fulford" wrote in message
> > > news:6CA593A9E0B4568E85095008E333208F@in.WebX.maYIadrTaRb...
> > > > In an IDW its as easy as a RMB before placing the dim,
> > > >
> > > > In an IPT its not doable without math formulas
> > > >
> > > > - drew
> > > >
> > > > --
> > > > Drew Fulford B.A.Sc. Systems Engineer
> > > > Solid Caddgroup Inc. Burlington, Ontario
> > > > Tel: (905)331-9670, Fax: (905)331-7280
> > > > Corporate: http://www.solidcadcam.com/
> > > >
> > > > Member of the Autodesk Discussion Forum Moderator Program
> > > > Visit my MCAD website @ http://www.mymcad.com/
> > > >
> > > >
> > > >
> > > > "Brian Mears" wrote in message
> > > > news:57DE2AC54F66919B2C27918860694D40@in.WebX.maYIadrTaRb...
> > > > > Is it possible in Inventor to dimension an arc's true length?
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*Caldwell, Larry
Message 13 of 14 (55 Views)

Re:

11-05-2002 04:38 AM in reply to: *Mears, Brian
Naturally I saw that only after I posted ... Duh! I picked on the dim ...
sure'nuf ... it was named arc length.
~Larry


"Sean Dotson" wrote in message
news:7064FE7FB96C3A62932CFE3AC74368D8@in.WebX.maYIadrTaRb...
> The vertical line is the arc length in both examples. In the first
example
> change the angle or radius to get the length. In the second change the
> length or radius to get the angle...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> remove all #s from email
> -----------------------------------------
> "Larry Caldwell" wrote in message
> news:3632CB02BE858051864756CCC8D2D404@in.WebX.maYIadrTaRb...
> > Which one is the arc length? Looks like the leader dim is the radius,
no?
> If
> > you change the angle, it still keeps the same dim.
> > ~Larry
> >
> > "Sean Dotson" wrote in message
> > news:F7066DFE262584F8DDEDF2584945C0F0@in.WebX.maYIadrTaRb...
> > > oops hit enter too soon...
> > >
> > > The vertical line shows the arc length
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > remove all #s from email
> > > -----------------------------------------
> > > "Sean Dotson" wrote in message
> > > news:381D66E87B7A7998CE253DC130329302@in.WebX.maYIadrTaRb...
> > > > There is an example in Cf on how to do it in part mode..
> > > >
> > > > --
> > > > Sean Dotson, PE
> > > > http://www.sdotson.com
> > > > remove all #s from email
> > > > -----------------------------------------
> > > > "Drew Fulford" wrote in message
> > > > news:6CA593A9E0B4568E85095008E333208F@in.WebX.maYIadrTaRb...
> > > > > In an IDW its as easy as a RMB before placing the dim,
> > > > >
> > > > > In an IPT its not doable without math formulas
> > > > >
> > > > > - drew
> > > > >
> > > > > --
> > > > > Drew Fulford B.A.Sc. Systems Engineer
> > > > > Solid Caddgroup Inc. Burlington, Ontario
> > > > > Tel: (905)331-9670, Fax: (905)331-7280
> > > > > Corporate: http://www.solidcadcam.com/
> > > > >
> > > > > Member of the Autodesk Discussion Forum Moderator Program
> > > > > Visit my MCAD website @ http://www.mymcad.com/
> > > > >
> > > > >
> > > > >
> > > > > "Brian Mears" wrote in message
> > > > > news:57DE2AC54F66919B2C27918860694D40@in.WebX.maYIadrTaRb...
> > > > > > Is it possible in Inventor to dimension an arc's true length?
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*Bogan, Bill
Message 14 of 14 (55 Views)

Re:

11-05-2002 03:45 PM in reply to: *Mears, Brian
Personally, I vote that the code for the drawing arc length be copied and
used in the Part model
IMHO.
--
Bill Bogan

"Larry Caldwell" wrote in message
news:962DDAF94B9E27DF72F57DF1799598B4@in.WebX.maYIadrTaRb...
> Naturally I saw that only after I posted ... Duh! I picked on the dim ...
> sure'nuf ... it was named arc length.
> ~Larry
>
>
> "Sean Dotson" wrote in message
> news:7064FE7FB96C3A62932CFE3AC74368D8@in.WebX.maYIadrTaRb...
> > The vertical line is the arc length in both examples. In the first
> example
> > change the angle or radius to get the length. In the second change the
> > length or radius to get the angle...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > remove all #s from email
> > -----------------------------------------
> > "Larry Caldwell" wrote in message
> > news:3632CB02BE858051864756CCC8D2D404@in.WebX.maYIadrTaRb...
> > > Which one is the arc length? Looks like the leader dim is the radius,
> no?
> > If
> > > you change the angle, it still keeps the same dim.
> > > ~Larry
> > >
> > > "Sean Dotson" wrote in message
> > > news:F7066DFE262584F8DDEDF2584945C0F0@in.WebX.maYIadrTaRb...
> > > > oops hit enter too soon...
> > > >
> > > > The vertical line shows the arc length
> > > >
> > > > --
> > > > Sean Dotson, PE
> > > > http://www.sdotson.com
> > > > remove all #s from email
> > > > -----------------------------------------
> > > > "Sean Dotson" wrote in message
> > > > news:381D66E87B7A7998CE253DC130329302@in.WebX.maYIadrTaRb...
> > > > > There is an example in Cf on how to do it in part mode..
> > > > >
> > > > > --
> > > > > Sean Dotson, PE
> > > > > http://www.sdotson.com
> > > > > remove all #s from email
> > > > > -----------------------------------------
> > > > > "Drew Fulford" wrote in message
> > > > > news:6CA593A9E0B4568E85095008E333208F@in.WebX.maYIadrTaRb...
> > > > > > In an IDW its as easy as a RMB before placing the dim,
> > > > > >
> > > > > > In an IPT its not doable without math formulas
> > > > > >
> > > > > > - drew
> > > > > >
> > > > > > --
> > > > > > Drew Fulford B.A.Sc. Systems Engineer
> > > > > > Solid Caddgroup Inc. Burlington, Ontario
> > > > > > Tel: (905)331-9670, Fax: (905)331-7280
> > > > > > Corporate: http://www.solidcadcam.com/
> > > > > >
> > > > > > Member of the Autodesk Discussion Forum Moderator Program
> > > > > > Visit my MCAD website @ http://www.mymcad.com/
> > > > > >
> > > > > >
> > > > > >
> > > > > > "Brian Mears" wrote in message
> > > > > > news:57DE2AC54F66919B2C27918860694D40@in.WebX.maYIadrTaRb...
> > > > > > > Is it possible in Inventor to dimension an arc's true length?
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.