Inventor General Discussion

Inventor General Discussion

Reply
Member
gta3005
Posts: 3
Registered: ‎02-14-2013
Message 1 of 6 (698 Views)
Accepted Solution

Difficulty with flat Pattern on ellipse

698 Views, 5 Replies
02-14-2013 07:55 AM

Hello,

First post here so hopefully it works out well. I'm having difficulty with a sheet metal part creating a flat pattern for it. The shape is an ellipse with the dimmensions shown in the second picture. When I attempt to create a flat pattern it just shows the side of the part. The sheet metal defaults are correct for the part and it was ripped to created a base point for the pattern. I need to create a DXF for manufacture. I would just use the flat pattern it gives me and mirror it twice to create a pattern but it doesnt factor in the radius of the part. Any thought on how to create a correct flat pattern for this item?

 

Thanks

 

I have to run - so not time to finish the part, but you get the idea

see attached

*Expert Elite*
JDMather
Posts: 28,238
Registered: ‎04-20-2006
Message 2 of 6 (680 Views)

Re: Difficulty with flat Pattern on ellipse

02-14-2013 07:59 AM in reply to: gta3005

What version of Inventor?

Do not sketch the thickness - Inventor will do that for you.

Only need one ellipse.

Contoured Flange (from the sheet metal tools).

Rip
Flat Pattern.

 

Attach your ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
gta3005
Posts: 3
Registered: ‎02-14-2013
Message 3 of 6 (675 Views)

Re: Difficulty with flat Pattern on ellipse

02-14-2013 08:07 AM in reply to: JDMather

Inventor Professional 2013

 

Thanks for the quick response

*Expert Elite*
JDMather
Posts: 28,238
Registered: ‎04-20-2006
Message 4 of 6 (665 Views)

Re: Difficulty with flat Pattern on ellipse

02-14-2013 08:09 AM in reply to: gta3005

Let me give that another try - looks like Contoured Flange won't select an ellipse.   (and you left out some inportant information about the trims)

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
JDMather
Posts: 28,238
Registered: ‎04-20-2006
Message 5 of 6 (650 Views)

Re: Difficulty with flat Pattern on ellipse

02-14-2013 08:14 AM in reply to: JDMather

I have to run - so not time to finish the part, but you get the idea

see attached

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
gta3005
Posts: 3
Registered: ‎02-14-2013
Message 6 of 6 (640 Views)

Re: Difficulty with flat Pattern on ellipse

02-14-2013 08:17 AM in reply to: JDMather

Thanks so much

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.