Inventor General Discussion

Inventor General Discussion

Reply
Active Contributor
ashley.walker
Posts: 36
Registered: ‎10-10-2011
Message 1 of 3 (360 Views)
Accepted Solution

Detailed Drawings and Level Of Detail

360 Views, 2 Replies
12-02-2012 06:29 PM

Hello everyone,

 

I have a model of a Rack that I have configures with iAssembly (2 configurations with different amounts of equipment on them). I have setup 2 level of details to reflect this.

 

1.PNG2.PNG

 

But when I go to the 2D drawings I cannot select either of these Level of Details in the Drawings.

 

3.PNG4.PNG

 

Is there a way to show these level of details? Or should I do this another way?

 

Thank you in advance.

Hello Ashley,

 

seems your iassembly file need saveing before use in the drawing. Notice the "LevelofDetail1" in the Drawing View dialog. This is default naming for new LOD created. Seems this was the last time when assembly was saved. Try to save the assembly and place it to new (blank) drawing. Both custom views should be loaded in the list.

Let me know then.

 

Thanks,

Jozef

Employee
jozef.dubaj
Posts: 41
Registered: ‎11-22-2011
Message 2 of 3 (345 Views)

Re: Detailed Drawings and Level Of Detail

12-03-2012 02:28 AM in reply to: ashley.walker

Hello Ashley,

 

seems your iassembly file need saveing before use in the drawing. Notice the "LevelofDetail1" in the Drawing View dialog. This is default naming for new LOD created. Seems this was the last time when assembly was saved. Try to save the assembly and place it to new (blank) drawing. Both custom views should be loaded in the list.

Let me know then.

 

Thanks,

Jozef

Active Contributor
ashley.walker
Posts: 36
Registered: ‎10-10-2011
Message 3 of 3 (303 Views)

Thanks, It seemed like it wasn't saving correctly. It is...

12-06-2012 09:50 PM in reply to: jozef.dubaj

Thanks, It seemed like it wasn't saving correctly.

It is now working. :smileyhappy:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.