Inventor General Discussion

Reply
Active Member
nicoskylark
Posts: 10
Registered: ‎11-01-2013
Message 11 of 19 (134 Views)

Re: cylinder insert

11-01-2013 04:35 PM in reply to: nicoskylark

The other piece must rotate with the ball bearing, not only the other piece and the ball bearing fixed to holder. Do you want I attach the assembly file and his parts?

Active Member
nicoskylark
Posts: 10
Registered: ‎11-01-2013
Message 12 of 19 (126 Views)

Re: cylinder insert

11-01-2013 04:55 PM in reply to: nicoskylark

Thats the last part. The assembly have more pieces but only that three pieces give me problems.

*Expert Elite*
JDMather
Posts: 28,056
Registered: ‎04-20-2006
Message 13 of 19 (118 Views)

Re: cylinder insert

11-01-2013 05:11 PM in reply to: nicoskylark

What happened to your dimensions?

Where did they go?

How did you create sketches without dimensions?

 

A 12mm hole is the wrong size for a 12mm thread - there will not be any material for the fastener to attach.

Use the Hole feature to make tapped holes, not Extruded circles.

(see attached image)

 

Before moving to more advanced topics like assembly constraints - I recommend going through these

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf
http://inventortrenches.blogspot.com/p/inventor-tutorials.html
http://wikihelp.autodesk.com/enu?adskContextId=HELP_TUTORIALS&language=ENU&release=2014&product=Inve...

 

You assembly works as expected for me, but missing a lot of parts.

I assume you want to Mate workplane of Maza to Rodamiento, but the bearing is made as one part rather than as an assembly like a real bearing - so it is not going to work exaclty like a real bearing.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
JDMather
Posts: 28,056
Registered: ‎04-20-2006
Message 14 of 19 (112 Views)

Re: cylinder insert

11-01-2013 05:17 PM in reply to: JDMather

Edit Sketch5 as in image.

Right click and Show All Constraints.

What do you see?

 

It is better to make a simple sketch and feature and then pattern the feature rather than the sketch.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
nicoskylark
Posts: 10
Registered: ‎11-01-2013
Message 15 of 19 (101 Views)

Re: cylinder insert

11-01-2013 05:42 PM in reply to: JDMather

The dimension, once the sketch is ok, I did erase it. Now I could solve my problem, all the parts who must rotate together I defined as a sub assembly, then I place it into the ball bearing holder using the ball bearing axis, now works perfectly. Thank you very much for the help and forr quick answer.

*Expert Elite*
JDMather
Posts: 28,056
Registered: ‎04-20-2006
Message 16 of 19 (87 Views)

Re: cylinder insert

11-02-2013 04:56 AM in reply to: nicoskylark

nicoskylark wrote:

The dimension, once the sketch is ok, I did erase it.


Do not erase dimensions.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
nicoskylark
Posts: 10
Registered: ‎11-01-2013
Message 17 of 19 (76 Views)

Re: cylinder insert

11-02-2013 01:10 PM in reply to: nicoskylark

I have another problem, when I want animate the assembly in inventor studio the gears doesn't move, they have constraint of motion. The assembly is too big, I attached it to Skydrive in http://sdrv.ms/1faJeVz

*Expert Elite*
JDMather
Posts: 28,056
Registered: ‎04-20-2006
Message 18 of 19 (60 Views)

Re: cylinder insert

11-02-2013 02:03 PM in reply to: nicoskylark

Find the red End of Part marker in the browser.
(End of Folded on sheet metal parts EOF)
Drag the red EOP to the top of the browser hiding all features.

Save the file with the EOP in a rolled up state.

Right click on the file name and select Send to Compressed (zipped) Folder.

Attach the resulting *.zip file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
nicoskylark
Posts: 10
Registered: ‎11-01-2013
Message 19 of 19 (53 Views)

Re: cylinder insert

11-02-2013 03:11 PM in reply to: JDMather

I can see that End Part marker in the parts, but no in the Assembly, should I do that only in parts and attach the assembly file directly?

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!