Inventor General Discussion

Inventor General Discussion

Reply
Member
northweststavecody
Posts: 3
Registered: ‎04-11-2011
Message 1 of 6 (2,485 Views)
Accepted Solution

Cutting out material in assembly view using a second piece

2485 Views, 5 Replies
04-11-2011 04:52 PM

 

I am wondering if there is a way to use a part of one piece located in an assembly to cutout a portion of another piece located in an assembly when both pieces occupy the same space?

 

 

 

The situation I'm in is that I've got an L bracket (piece 1) resting on top of a piece representing a concrete block (piece 2).  The L bracket has metal studs attached that protrude into the concrete. Idealy I'd like the mass of concrete located in the same space as the studs removed so that when I generate cross sections everything adds up.

 

 

 

Any help is much appreciated,

 

Thanks,

Cody 

 

Hi northweststavecody,

 

In addition to JDMather's help, this link might offer some assistance:

http://inventortrenches.blogspot.com/2011/03/find-interference-and-add-tolerance-to.html

 

I hope that helps.

Best of luck to you in all of your Inventor pursuits,

Curtis

http://inventortrenches.blogspot.com/

 

 

 

 

 

*Expert Elite*
JDMather
Posts: 26,821
Registered: ‎04-20-2006
Message 2 of 6 (2,481 Views)

Re: Cutting out material in assembly view using a second piece

04-11-2011 05:51 PM in reply to: northweststavecody

Edit the part to be cut within the context of the assembly.
Right click and Copy Object as surface the faces of the second part into the first part.
Use Split part or Sculpt to cut the first part.
Attach your assembly here if you can't figure it out.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
northweststavecody
Posts: 3
Registered: ‎04-11-2011
Message 3 of 6 (2,437 Views)

Re: Cutting out material in assembly view using a second piece

04-12-2011 10:26 AM in reply to: northweststavecody

Thanks for the help. I gave it a shot but was unable to solve the problem.

 

 I was able to copy and create a surface in parts bracket 13625L and bracket1352 redo:1.

 

Hoever I could not manage to get these surfaces to interact or move to Grating Oil Water Sump v2:1 (the part that I'm trying to cut). I've attached the assembly. hopefully it helps solve the problem.

 

 

*Expert Elite*
JDMather
Posts: 26,821
Registered: ‎04-20-2006
Message 4 of 6 (2,417 Views)

Re: Cutting out material in assembly view using a second piece

04-12-2011 01:17 PM in reply to: northweststavecody
 
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
Curtis_Waguespack
Posts: 2,930
Registered: ‎03-08-2006
Message 5 of 6 (2,401 Views)

Re: Cutting out material in assembly view using a second piece

04-12-2011 02:47 PM in reply to: northweststavecody

Hi northweststavecody,

 

In addition to JDMather's help, this link might offer some assistance:

http://inventortrenches.blogspot.com/2011/03/find-interference-and-add-tolerance-to.html

 

I hope that helps.

Best of luck to you in all of your Inventor pursuits,

Curtis

http://inventortrenches.blogspot.com/

 

 

 

 

 



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





New Member
mark.d.jackson
Posts: 2
Registered: ‎12-01-2012
Message 6 of 6 (1,813 Views)

Re: Cutting out material in assembly view using a second piece

12-14-2012 08:09 PM in reply to: northweststavecody

What about using an iFeature to do the material removal?

 

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.