Inventor General Discussion

Inventor General Discussion

Reply
*Expert Elite*
28,597 Posts
2,122 Kudos
Registered: ‎04-20-2006
Post 11 of 13

Re: cut and paste

01-14-2013 07:30 AM in reply to: Cadmanto

Cadmanto wrote:

I have tried numerous time to select a part in the assembly tree and do a ctrl-C and then a ctrl-V


Didn't read through this entire thread - I assume you have found out that you can Ctrl drag copies of parts from assemby tree to graphics window.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
3,002 Posts
1,702 Kudos
Registered: ‎03-08-2006
Post 12 of 13

Re: cut and paste

01-14-2013 07:54 AM in reply to: Cadmanto

Cadmanto wrote:
I have tried numerous time to select a part in the assembly tree and do a ctrl-C and then a ctrl-V

and it has never worked for me.


Hi Cadmanto,

 

If you select the target part in the browser and press CTRL + C on the keyboard, then click in the graphics area and then press CTRL + V on the keyboard it should work. Keep in mind that the click in the graphics area provides the insertion point as well.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Employee
19 Posts
0 Kudos
Registered: ‎12-08-2011
Post 13 of 13

Re: cut and paste

01-15-2013 12:47 AM in reply to: jsmith923

Hi,

you are right, I see the same behaviour on my machine.

I have logged an issue (DID1489576 ) for this topic to our internal database so people from Autodesk can take a look.

 

Thanks for reporting this issue!

 

Stanislav Sedlak

Autodesk

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post