Inventor General Discussion

Inventor General Discussion

Reply
Valued Contributor
Stemdriller
Posts: 92
Registered: ‎12-15-2011
Message 1 of 4 (191 Views)
Accepted Solution

Creating Dimensions on sketch

191 Views, 3 Replies
12-17-2012 08:11 AM

Hi all

 

One of our senior designers seems to think there is a setting when creating a sketch that will automatically dimension.

 

So if a straight line is draw and 5 mm length is entered a 5 mm line will immedialtey be created, he seems to think that you can then immedialtey Dimension said line??

 

I can't find anything, settings wise, but he is a switched on guy so just wondered if there is any truth to his claim?

 

Thanks

Gareth 

As JD said.

App options, Sketch, Heads-Up Display, Create Dim's

*Expert Elite*
JDMather
Posts: 27,067
Registered: ‎04-20-2006
Message 2 of 4 (187 Views)

Re: Creating Dimensions on sketch

12-17-2012 08:36 AM in reply to: Stemdriller

What version of Inventor are you using?

For the past few releases you can enter the dimensions directly as you are creating the sketch.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Distinguished Mentor
rdyson
Posts: 897
Registered: ‎04-11-2005
Message 3 of 4 (181 Views)

Re: Creating Dimensions on sketch

12-17-2012 09:00 AM in reply to: Stemdriller

As JD said.

App options, Sketch, Heads-Up Display, Create Dim's

Valued Contributor
Stemdriller
Posts: 92
Registered: ‎12-15-2011
Message 4 of 4 (145 Views)

Re: Creating Dimensions on sketch

12-18-2012 12:16 AM in reply to: rdyson

Thank you to both for your responses.

 

That is just what we was looking for.

 

Thanks again

 

GW

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.