Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Is it possible to create a subassembly within an assembly file?
In MDT you could just create an empty Subassembly & drag parts into it
within the browser (but this was a different file structure than IV, of
course).
Yes... Create Component in the assembly, and change the component type to
assembly instead of part.
"Gary Cross" wrote in message
news:64CDAC9EC5BD736DAF613F7376C616C9@in.WebX.maYIadrTaRb...
> Is it possible to create a subassembly within an assembly file?
>
> In MDT you could just create an empty Subassembly & drag parts into it
> within the browser (but this was a different file structure than IV, of
> course).
>
> --
> Gary
> gcross@crossdesign.com
>
>
Select the parts in the browser or on the screen. RMB and selct demote.
Kathy Johnson
"Gary Cross" wrote in message
news:64CDAC9EC5BD736DAF613F7376C616C9@in.WebX.maYIadrTaRb...
> Is it possible to create a subassembly within an assembly file?
>
> In MDT you could just create an empty Subassembly & drag parts into it
> within the browser (but this was a different file structure than IV, of
> course).
>
> --
> Gary
> gcross@crossdesign.com
>
>
Oh, Gary, did you mean create a subassembly of parts that are already
inserted into an assembly? If so, Kathy's right on the money.
When you do this, Inventor will maintain the constraints applied between the
parts being demoted, but you'll lose any constraint between a demoted part
and a non-demoted part.
"KJohnson" wrote in message
news:1631E4F0399D207F7A2E4770EFCF9B77@in.WebX.maYIadrTaRb...
> Select the parts in the browser or on the screen. RMB and selct demote.
>
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")