Inventor General Discussion

Inventor General Discussion

Reply
Member
aromis
Posts: 4
Registered: ‎10-09-2012
Message 1 of 2 (247 Views)

creating a standard two part mold (help needed)

247 Views, 1 Replies
10-09-2012 03:28 PM

I am able to create parts and components in inventor without a problem quite easily but i have a problem creating a two part mold

 

i have found several tutorials and 2 pdf documents via google on how to create a mold from already pre exisiting compents like those i have made

 

the technical term they used to describe the process is to create a derived part

 

but alas these documents and videos, are incomplete or incorrct vital parts or instructions on the step by step are missing or not mentioned as such i can never do it

 

I even asked several lecturers at my college and none have any idea on how to do this or any mold process

 

can someone please please create a step by step, dummies guide on how to do this

*Expert Elite*
JDMather
Posts: 28,238
Registered: ‎04-20-2006
Message 2 of 2 (242 Views)

Re: creating a standard two part mold (help needed)

10-09-2012 04:06 PM in reply to: aromis

aromis wrote:

 

I even asked several lecturers at my college and none have any idea on how to do this or any mold process

 

 


You are obviously attending the wrong school    :smileysad:
the easy way
http://home.pct.edu/~jmather/content/DSG322/Inventor%20Tutorials/Inventor%202011%20Tutorial%2014.pdf
the old (hard) way
http://home.pct.edu/~jmather/content/DSG322/Inventor%20Tutorials/Inventor%2011%20Tutorial%206.pdf
When you run into trouble - attach your file(s) here.

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.