Inventor General Discussion

Inventor General Discussion

Reply
Member
MelJM
Posts: 5
Registered: ‎12-27-2011
Message 1 of 6 (1,745 Views)
Accepted Solution

Create Flat Pattern Command Missing

1745 Views, 5 Replies
12-27-2011 03:32 PM

I recently switched to Inventor 2012 from a previous version. I cannot find the create flat pattern command. Some of my coworkers were able to customize their RMB menu to have this command, but I am not even able to do that! (They don't have the command on the ribbon, either.)

 

I attached a picture of my sheet metal ribbon... don't know if it's helpful or not.

All I did on that part was create a face and add a flange, to see if on such a simple part the flat panel command would "appear".

 

 

 

Just started up Inventor for the day, and the command was there. I have no idea what changed between yesterday and today. Stay tuned, perhaps it will dissappear again?

 

*Expert Elite*
JDMather
Posts: 28,246
Registered: ‎04-20-2006
Message 2 of 6 (1,727 Views)

Re: Create Flat Pattern Command Missing

12-28-2011 03:34 AM in reply to: MelJM

Attach that ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
Curtis_Waguespack
Posts: 3,002
Registered: ‎03-08-2006
Message 3 of 6 (1,716 Views)

Re: Create Flat Pattern Command Missing

12-28-2011 07:45 AM in reply to: MelJM

Hi MelJM,

 

This might help:

http://forums.autodesk.com/t5/Autodesk-Inventor/Sheet-Metal-Part-Has-No-Flat-Pattern-Button/m-p/3268...

If so, kudos to jeanchile for sharing the solution.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

 

 



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Member
MelJM
Posts: 5
Registered: ‎12-27-2011
Message 4 of 6 (1,709 Views)

Re: Create Flat Pattern Command Missing

12-28-2011 08:17 AM in reply to: JDMather

All I did on that part was create a face and add a flange, to see if on such a simple part the flat panel command would "appear".

 

 

 

Just started up Inventor for the day, and the command was there. I have no idea what changed between yesterday and today. Stay tuned, perhaps it will dissappear again?

 

sk
Active Member
sk
Posts: 10
Registered: ‎11-01-2012
Message 5 of 6 (1,019 Views)

Re: Create Flat Pattern Command Missing

07-25-2013 04:26 AM in reply to: MelJM

Hi,

So, same thing happend to me today; the Flat Patten panel was simply just gone.

So i forund this post. No answer though..

 

Seems like your problem solved it self without knowing why.

Mine didnt. Tried restarting both inventor and windows, but still no Flat Pattern panel!

 

Then I tried opening the same files from my colleagues pc, and voila, no problems. Flat Pattern panel was on colleagues pc, but not mine.

 

So, to go to the action: turns out I somehow "turned the panel off". And heres how to turn on/off all panels after wish:

  1. Right-click a random place on the ribbon(only remember to do it in the tab of issue, in this case "Sheet Metal" tab)
  2. Choose "Show Panels" in menu
  3. give or remove check mark of the panel you want to add or remove.

- see attachment

 

Missing panel.png

 

Voilá!

 

/sean

 

 

Valued Contributor
methoni
Posts: 97
Registered: ‎11-02-2012
Message 6 of 6 (93 Views)

Re: Create Flat Pattern Command Missing

10-09-2014 06:10 AM in reply to: sk

Well done

Had the same problem,followed your  instructions and hey presto problem solved

Regards

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.