Inventor General Discussion

Inventor General Discussion

Reply
New Member
1 Posts
0 Kudos
Registered: ‎10-06-2012
Post 1 of 2

Create a sketch with line starting points depending on other sketches

131 Views, 1 Replies
10-06-2012 02:09 AM

Hello

 

I want to draw a line between the two sketches visible on the image below. The line should be in the plane visible. The starting point of the line should be from wherever the top sketch intersects  the plane of the current sketch. The finnish point of the line should be wherever a line of the bottom sketch intersects the current sketch plane.

 

There is no tooltip appearing that would allow me to quickly "attach" the starting line to the correct position. Is there such an aid, and how do i turn it on?2.jpg1.jpg

*Expert Elite*
28,621 Posts
2,126 Kudos
Registered: ‎04-20-2006
Post 2 of 2

Re: Create a sketch with line starting points depending on other sketches

10-06-2012 05:46 AM in reply to: inventor444

Project Geometry.

 

and

your first two sketches aren't constrained.

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!