Inventor General Discussion

Reply
New Member
titley
Posts: 2
Registered: ‎12-02-2009
Message 1 of 10 (467 Views)

Content Center

467 Views, 9 Replies
12-02-2009 03:30 PM
Content center data is missing. I have tried to relocate the content center directory file to the tutorial file but found that the location did not have a library, now there is no part available in content center, how do I get part back into the content center.
Valued Contributor
bobbyzhou
Posts: 57
Registered: ‎05-29-2008
Message 2 of 10 (467 Views)

Re: Content Center

12-02-2009 10:11 PM in reply to: titley
Hi,

Could you please tell us more details? E.g What's your Inventor version, what server are you using?


Thanks,
BobbyZhou(Autodesk)
New Member
titley
Posts: 2
Registered: ‎12-02-2009
Message 3 of 10 (467 Views)

Re: Content Center

12-08-2009 07:08 PM in reply to: titley
Hi, Version is inventor pro 2010 educational version.
I have run the installation repair tool and content files are now ok.
But... I am running through the tutorials level 1/5 assemblies, adding hardware but the part (ANSI B 27.7M) is not in the content centre library, ISO464 is located in the library (not needed for that exerise). When I view the 'Configure Content Centre Libraries' it says that the ansi files, plus others are 'not available'.
Is this because I have the educational version? Is there a fix?
*Dennis Jeffrey
Message 4 of 10 (467 Views)

Re: Content Center

12-09-2009 07:35 AM in reply to: titley
Contact me and I'll provide a download location for students
--
Dennis Jeffrey, Autodesk Inventor Certified Expert
Autodesk Manufacturing Implementation Certified Expert.
Instructor/Author/Sr. App Engr. Tel. (260) 399-6615
http://teknigroup.com
Active Member
torque22
Posts: 6
Registered: ‎02-01-2007
Message 5 of 10 (467 Views)

Re: Content Center

01-05-2010 12:06 PM in reply to: titley
I need them files also. I am using Inventor 2010 64-bit educational version. I am going through the tutorials and am having the same problem.
Active Member
torque22
Posts: 6
Registered: ‎02-01-2007
Message 6 of 10 (467 Views)

Re: Content Center

01-05-2010 02:05 PM in reply to: titley
Thanks Dennis!
New Member
kevinslater
Posts: 2
Registered: ‎09-24-2008
Message 7 of 10 (467 Views)

Re: Content Center

01-12-2010 08:23 AM in reply to: titley
Dennis - I came across your post whilst looking for a solution to exactly this problem - lack of non-ISO Content Centre parts in the Academic version of 2010 - can you assist me as well please?

Kevin Slater
Lecturer, University of West of England
New Member
Duikplank
Posts: 1
Registered: ‎02-05-2011
Message 8 of 10 (239 Views)

Re: Content Center

02-05-2011 02:36 PM in reply to: *Dennis Jeffrey

Hello Dennis,

I'm having the same problem, could you help me too please.

 

David

*Pro
Dennis_Jeffrey
Posts: 1,369
Registered: ‎12-15-2003
Message 9 of 10 (226 Views)

Re: Content Center

02-05-2011 05:34 PM in reply to: Duikplank

It's here for 2010 and 2011.

 

http://teknigroup.com >> Downloads

Please mark this response as "Accept as Solution" if it answers your question.
____________________________________________________________
Dennis Jeffrey, Author and Manufacturing Trainer, Autodesk Inventor Certified Expert
Autodesk Manufacturing Implementation Certified Expert
Autodesk Silver Manufacturing Partner

Subscribe to the free digital "The Creative Inventor Magazine" now available at: http://teknigroup....

XP64 SP2, GeForce 9800GT-1GB, Driver: 6.14.12.7061, 8GB Ram, AMD Athlon II 3.2 Ghz
Laptop: Win7-64 Pro, 4GB, ATI Graphics on board, 2012 Ultimate, IV2011 or 2010 Pro, all SP's
*Expert Elite*
JDMather
Posts: 28,047
Registered: ‎04-20-2006
Message 10 of 10 (220 Views)

Re: Content Center

02-05-2011 06:07 PM in reply to: kevinslater

kevinslater wrote:
... - lack of non-ISO Content Centre parts in the Academic version of 2010 - Kevin Slater
Lecturer, University of West of England

For future reference the 2010 Content Center libraries are available from the FAQ page on the Autodesk student community.
Students should be able to find this link to download the libraries.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!