Inventor General Discussion

Reply
Valued Contributor
pompeo79
Posts: 97
Registered: ‎02-08-2011
Message 1 of 3 (275 Views)
Accepted Solution

Content Center Library

275 Views, 2 Replies
12-11-2013 02:34 AM

Hi to all,

 

if i have created a custom content center library,  where all content center parts use my material "Steel XYZ", is there a way to use it in old assemblies that use a no custom content center library?

 

I mean, i have 100 assemblies that use bolt with Steel Mild material... can i change that material changing thecontent center library and using mine that use "Steel XYZ"?

 

Thanks for support!

 

 

You would need to open each of those assemblies and use Replace From Content Center on the parts.  You can do a "Replace All" on each part, but there is (unfortunately) no magic button that will just switch all of your fasteners to the new library.  If the fasteners came from a read only library, you may be stuck replacing them all the old fashioned way. 

*Expert Elite*
cbenner
Posts: 3,392
Registered: ‎04-06-2010
Message 2 of 3 (255 Views)

Re: Content Center Library

12-11-2013 05:40 AM in reply to: pompeo79

You would need to open each of those assemblies and use Replace From Content Center on the parts.  You can do a "Replace All" on each part, but there is (unfortunately) no magic button that will just switch all of your fasteners to the new library.  If the fasteners came from a read only library, you may be stuck replacing them all the old fashioned way. 

ChrisB

ADSK_Expert_Elite_Icon_S_Color_Blk.png

Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Thank you! :smileyhappy:

http://cadtipstricks.wordpress.com//


   

Valued Contributor
pompeo79
Posts: 97
Registered: ‎02-08-2011
Message 3 of 3 (251 Views)

Re: Content Center Library

12-11-2013 06:22 AM in reply to: cbenner
Thank You Chris!
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!