Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
265 Posts
5 Kudos
Registered: ‎11-28-2011
Post 1 of 4
Accepted Solution

Contact Set grayed out

268 Views, 3 Replies
01-07-2014 06:41 AM

Why is a part in an assembly not enabled for contact set? on right click the Contact Set option is grayed out, but that part was in contact set for another part already. i made some changes in the part, maybe that's the reason, is it?

I cannot open the assembly not on your version where I am at.

 

 

 Do you have adaptive in any of the parts or assemblies you are trying to use contact set on?

 

 If you do this is why..

*Expert Elite*
28,585 Posts
2,119 Kudos
Registered: ‎04-20-2006
Post 2 of 4

Re: Contact Set grayed out

01-07-2014 07:17 AM in reply to: Karol-Or

Attach the assembly here.  (delete all but two parts)

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Distinguished Contributor
265 Posts
5 Kudos
Registered: ‎11-28-2011
Post 3 of 4

Re: Contact Set grayed out

01-08-2014 02:34 AM in reply to: JDMather

Attached.

Open the file ... 19(3)

*Pro
1,986 Posts
404 Kudos
Registered: ‎05-18-2011
Post 4 of 4

Re: Contact Set grayed out

01-08-2014 05:28 AM in reply to: Karol-Or

I cannot open the assembly not on your version where I am at.

 

 

 Do you have adaptive in any of the parts or assemblies you are trying to use contact set on?

 

 If you do this is why..


Please mark this response as "Accept as Solution" if it answers your question.

James Letcher
2012 Factory Design Suite ( will not load 2013)
What happen to my Inventor :-(
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post