Inventor General Discussion

Inventor General Discussion

Reply
New Member
Kuma_Liska
Posts: 1
Registered: ‎11-27-2002
Message 1 of 4 (62 Views)

Constraints

62 Views, 3 Replies
11-14-2002 07:13 PM
Hi,
Can somebody help me how to constraint an 'O'rin into an 'O'ring groove. I've placed an "Mate" between the two axis but I can not stop the 'O'ring from moving along the rod.
Thank you
Nina
*Dotson, Sean
Message 2 of 4 (62 Views)

Re: Constraints

11-14-2002 10:06 PM in reply to: Kuma_Liska
This really needs to be in one of the support NGs..
but...

 

You need to reference a workplane on the oring to
another surface on the shaft.  Use one of the origin planes or make a new
user plane on the oring.


--
Sean Dotson, PE

href="http://www.sdotson.com">http://www.sdotson.com

...sleep is for the
weak..
-----------------------------------------


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
Hi,

Can somebody help me how to constraint an 'O'rin into an 'O'ring groove.
I've placed an "Mate" between the two axis but I can not stop the 'O'ring from
moving along the rod.
Thank you
Nina
*Chasek, Jerry
Message 3 of 4 (62 Views)

Re: Constraints

12-10-2002 01:04 AM in reply to: Kuma_Liska
I have a hydraulic cylinder assembly, The Body and the ram are separate
assemblies inserted into a larger assembly. One end is in place and
constrained with an axis mate, such as a pin inserted. I go to mate the axes
of the other end an I get an error. This is unfinished but I will try to
post the assembly. I have never posted one so any advice would help as this
is a large file.
Thanks
Jerry
*Keller, Kent
Message 4 of 4 (62 Views)

Re:

12-10-2002 01:10 AM in reply to: Kuma_Liska
I am not sure I understand what level the parts are on, but you may have to turn on
adaptivity in one of the subs to get it to move. Can you drag it at all with the mouse?

How large is large? open each part, and roll the eop marker to the top, and then zip it
all up. Should make it smaller. Customer files max is 10 mb, but you aren't going to get
to many people downloading something that big even.

--
Kent
Member of the Autodesk Discussion Forum Moderator Program


"Jerry Chasek" wrote in message
news:F7C1312ABEF921B882C3AF0CE34FE682@in.WebX.maYIadrTaRb...
> I have a hydraulic cylinder assembly, The Body and the ram are separate
> assemblies inserted into a larger assembly. One end is in place and
> constrained with an axis mate, such as a pin inserted. I go to mate the axes
> of the other end an I get an error. This is unfinished but I will try to
> post the assembly. I have never posted one so any advice would help as this
> is a large file.
> Thanks
> Jerry
>
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.