Inventor General Discussion

Inventor General Discussion

Reply
Contributor
nmetzger
Posts: 24
Registered: ‎08-24-2012
Message 1 of 3 (113 Views)

Constraining to a distance, Inventor 2013

113 Views, 2 Replies
12-13-2012 05:48 AM

I have attached the drawing I will be referencing. I need to set the distances of the four tabs to .50" from the edges of the part. How do I do this using constraints? 

Distinguished Mentor
john.retzlaff
Posts: 928
Registered: ‎11-03-2003
Message 2 of 3 (109 Views)

Re: Constraining to a distance, Inventor 2013

12-13-2012 06:12 AM in reply to: nmetzger

You need to attach the parts, you can't open an assembly without them.

John Retzlaff
*Expert Elite*
JDMather
Posts: 26,904
Registered: ‎04-20-2006
Message 3 of 3 (45 Views)

Re: Constraining to a distance, Inventor 2013

09-03-2013 03:06 PM in reply to: nmetzger

Have you figured out the difference between parts, assemblies and drawings in Inventor?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.