Inventor General Discussion

Inventor General Discussion

Reply
Contributor
mech5328
Posts: 21
Registered: ‎12-15-2012
Message 1 of 8 (435 Views)
Accepted Solution

coincidence point in 3D sketch

435 Views, 7 Replies
12-15-2012 11:45 AM

I want to concide two points of two different lines.These two lines have been created in two different workplanes with 2D sketch.

*Expert Elite*
blair
Posts: 4,075
Registered: ‎11-13-2006
Message 2 of 8 (427 Views)

Re: coincidence point in 3D sketch

12-15-2012 11:59 AM in reply to: mech5328

The only way I think this could be done, would be to project the geometry from the first sketch onto the second sketch that you are working on to be able to find the coincedence.

 

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 up2 PDSU / Sim Mech 2015 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 335.23
SpacePilot Pro 3.17.7, 6.17., 4.11
*Expert Elite*
JDMather
Posts: 26,602
Registered: ‎04-20-2006
Message 3 of 8 (415 Views)

Re: coincidence point in 3D sketch

12-15-2012 05:19 PM in reply to: mech5328

Attach the ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
mech5328
Posts: 21
Registered: ‎12-15-2012
Message 4 of 8 (402 Views)

Re: coincidence point in 3D sketch

12-16-2012 03:24 AM in reply to: JDMather

I want to coincide the midpoint of the edge of the rectangle with the edge of the spline curve.The rectangle is created in xy plane and the spline in xz plane.

*Expert Elite*
JDMather
Posts: 26,602
Registered: ‎04-20-2006
Message 5 of 8 (399 Views)

Re: coincidence point in 3D sketch

12-16-2012 03:36 AM in reply to: mech5328

Something like this?

(see attached)

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
mech5328
Posts: 21
Registered: ‎12-15-2012
Message 6 of 8 (392 Views)

Re: coincidence point in 3D sketch

12-16-2012 03:48 AM in reply to: JDMather

Yes.What's the way to do it?

 

*Expert Elite*
JDMather
Posts: 26,602
Registered: ‎04-20-2006
Message 7 of 8 (363 Views)

Re: coincidence point in 3D sketch

12-16-2012 12:28 PM in reply to: mech5328

Project Geometry.

I recommend you set aside your project for a few days while you do these Tutorials

http://wikihelp.autodesk.com/Inventor/enu/2013/Help/0126-Tutorial126

then these

http://inventortrenches.blogspot.com/p/inventor-tutorials.html

and after this one

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

come back and ask more questions when you have more trouble.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
mech5328
Posts: 21
Registered: ‎12-15-2012
Message 8 of 8 (343 Views)

Re: coincidence point in 3D sketch

12-17-2012 02:27 AM in reply to: JDMather

Ok

Thank you very much.

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.