Inventor General Discussion

Inventor General Discussion

Reply
Active Contributor
mech5328
Posts: 27
Registered: ‎12-15-2012
Message 1 of 8 (480 Views)
Accepted Solution

coincidence point in 3D sketch

480 Views, 7 Replies
12-15-2012 11:45 AM

I want to concide two points of two different lines.These two lines have been created in two different workplanes with 2D sketch.

The only way I think this could be done, would be to project the geometry from the first sketch onto the second sketch that you are working on to be able to find the coincedence.

 

Something like this?

(see attached)

Project Geometry.

I recommend you set aside your project for a few days while you do these Tutorials

http://wikihelp.autodesk.com/Inventor/enu/2013/Help/0126-Tutorial126

then these

http://inventortrenches.blogspot.com/p/inventor-tutorials.html

and after this one

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

come back and ask more questions when you have more trouble.

*Expert Elite*
blair
Posts: 4,494
Registered: ‎11-13-2006
Message 2 of 8 (472 Views)

Re: coincidence point in 3D sketch

12-15-2012 11:59 AM in reply to: mech5328

The only way I think this could be done, would be to project the geometry from the first sketch onto the second sketch that you are working on to be able to find the coincedence.

 

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.75
SpacePilot Pro 10.2.0 / 17.2.0.11011 / 4.17
Delta Tau Chi ΔΤΧ
*Expert Elite*
JDMather
Posts: 28,262
Registered: ‎04-20-2006
Message 3 of 8 (460 Views)

Re: coincidence point in 3D sketch

12-15-2012 05:19 PM in reply to: mech5328

Attach the ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
mech5328
Posts: 27
Registered: ‎12-15-2012
Message 4 of 8 (447 Views)

Re: coincidence point in 3D sketch

12-16-2012 03:24 AM in reply to: JDMather

I want to coincide the midpoint of the edge of the rectangle with the edge of the spline curve.The rectangle is created in xy plane and the spline in xz plane.

*Expert Elite*
JDMather
Posts: 28,262
Registered: ‎04-20-2006
Message 5 of 8 (444 Views)

Re: coincidence point in 3D sketch

12-16-2012 03:36 AM in reply to: mech5328

Something like this?

(see attached)

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
mech5328
Posts: 27
Registered: ‎12-15-2012
Message 6 of 8 (437 Views)

Re: coincidence point in 3D sketch

12-16-2012 03:48 AM in reply to: JDMather

Yes.What's the way to do it?

 

*Expert Elite*
JDMather
Posts: 28,262
Registered: ‎04-20-2006
Message 7 of 8 (408 Views)

Re: coincidence point in 3D sketch

12-16-2012 12:28 PM in reply to: mech5328

Project Geometry.

I recommend you set aside your project for a few days while you do these Tutorials

http://wikihelp.autodesk.com/Inventor/enu/2013/Help/0126-Tutorial126

then these

http://inventortrenches.blogspot.com/p/inventor-tutorials.html

and after this one

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

come back and ask more questions when you have more trouble.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
mech5328
Posts: 27
Registered: ‎12-15-2012
Message 8 of 8 (388 Views)

Re: coincidence point in 3D sketch

12-17-2012 02:27 AM in reply to: JDMather

Ok

Thank you very much.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.