Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

coincidence point in 3D sketch

7 REPLIES 7
SOLVED
Reply
Message 1 of 8
mech5328
1266 Views, 7 Replies

coincidence point in 3D sketch

I want to concide two points of two different lines.These two lines have been created in two different workplanes with 2D sketch.

7 REPLIES 7
Message 2 of 8
blair
in reply to: mech5328

The only way I think this could be done, would be to project the geometry from the first sketch onto the second sketch that you are working on to be able to find the coincedence.

 


Inventor 2020, In-Cad, Simulation Mechanical

Just insert the picture rather than attaching it as a file
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Delta Tau Chi ΔΤΧ

Message 3 of 8
JDMather
in reply to: mech5328

Attach the ipt file here.


-----------------------------------------------------------------------------------------
Autodesk Inventor 2019 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional


The CADWhisperer YouTube Channel


EESignature

Message 4 of 8
mech5328
in reply to: JDMather

I want to coincide the midpoint of the edge of the rectangle with the edge of the spline curve.The rectangle is created in xy plane and the spline in xz plane.

Message 5 of 8
JDMather
in reply to: mech5328

Something like this?

(see attached)


-----------------------------------------------------------------------------------------
Autodesk Inventor 2019 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional


The CADWhisperer YouTube Channel


EESignature

Message 6 of 8
mech5328
in reply to: JDMather

Yes.What's the way to do it?

 

Message 7 of 8
JDMather
in reply to: mech5328

Project Geometry.

I recommend you set aside your project for a few days while you do these Tutorials

http://wikihelp.autodesk.com/Inventor/enu/2013/Help/0126-Tutorial126

then these

http://inventortrenches.blogspot.com/p/inventor-tutorials.html

and after this one

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

come back and ask more questions when you have more trouble.


-----------------------------------------------------------------------------------------
Autodesk Inventor 2019 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional


The CADWhisperer YouTube Channel


EESignature

Message 8 of 8
mech5328
in reply to: JDMather

Ok

Thank you very much.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report