Inventor General Discussion

Inventor General Discussion

Reply
Contributor
sinus19
Posts: 25
Registered: ‎08-24-2012
Message 1 of 3 (387 Views)
Accepted Solution

Cant make Subassembly "Adaptive"

387 Views, 2 Replies
02-11-2013 02:25 PM

Hey guys,

I have an assembly that i want to insert in another assembly. When i do insert it i try to make it "Adaptive" but the option is graded out/not available. How can i make it Adaptive?

Adaptive requires geometry from other items to be projected and referenced by items within the sub assembly. Possibly you wish for a sub assembly such as a hinge to move/articulate within the main assembly, look at "Flexible".

 

RMB on the sub assembly within the main assembly and select "Flexible" from the drop-down menu.

*Expert Elite*
blair
Posts: 4,450
Registered: ‎11-13-2006
Message 2 of 3 (386 Views)

Re: Cant make Subassembly "Adaptive"

02-11-2013 02:32 PM in reply to: sinus19

Adaptive requires geometry from other items to be projected and referenced by items within the sub assembly. Possibly you wish for a sub assembly such as a hinge to move/articulate within the main assembly, look at "Flexible".

 

RMB on the sub assembly within the main assembly and select "Flexible" from the drop-down menu.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.75
SpacePilot Pro 10.2.0 / 17.2.0.11011 / 4.17
Delta Tau Chi ΔΤΧ
Contributor
sinus19
Posts: 25
Registered: ‎08-24-2012
Message 3 of 3 (378 Views)

Re: Cant make Subassembly "Adaptive"

02-11-2013 02:48 PM in reply to: blair

BINGO! yup thats what i wanted.. I want a hinge and a Lift support (two different assemblies with their own constrains) to work together. thanks

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.