Inventor General Discussion

Inventor General Discussion

Reply
*Expert Elite*
sam_m
Posts: 638
Registered: ‎11-05-2003
Message 11 of 25 (435 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 05:43 AM in reply to: cbenner

I was tempted to do post it in mm, not converted to mm but at 2.25mm tall...  But hey, got my own work to do

----------
Please mark this response as "Accept as Solution" if it answers your question...
but please understand that the solution may not be the answer you're wanting to hear...

If you have found any post to be helpful, even if it's not a direct solution, then please provide that author kudos - spread that love :smileyvery-happy:

Lithium - helping nntp users with mania, depression and headaches
*Pro
ampster
Posts: 1,388
Registered: ‎07-26-2005
Message 12 of 25 (419 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 06:40 AM in reply to: CannonInc

drawn in Inventor 2011, but you can use it in 2012.

 

No part file needed, just sketched a drawing for you.

 

HTH

Distinguished Contributor
dick_upton
Posts: 646
Registered: ‎02-25-2009
Message 13 of 25 (409 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 06:51 AM in reply to: sam_m

Good one amp. :smileyhappy:

*Pro
ampster
Posts: 1,388
Registered: ‎07-26-2005
Message 14 of 25 (388 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 07:40 AM in reply to: dick_upton

OP did say need help drawing...

 

LOL

*Expert Elite*
cwhetten
Posts: 1,090
Registered: ‎09-03-2008
Message 15 of 25 (350 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 08:59 AM in reply to: Rich.O.3d

I don't see any image attachments either.  I'm using Firefox, just updated to version 11 yesterday.

 

Anyone else using Firefox 11 who can't see the OP's image?

*Expert Elite*
mrattray
Posts: 2,538
Registered: ‎09-13-2011
Message 16 of 25 (330 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 09:26 AM in reply to: cwhetten

I was on Firefox 11 and could see it. I went to check my version to make sure and it updated itself to 12. Still see it.

Mike (not Matt) Rattray

*Expert Elite*
CelticDesignServices
Posts: 518
Registered: ‎11-29-2011
Message 17 of 25 (294 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 10:19 AM in reply to: CannonInc

Here you go....took me all of 10 minutes and I had a few emails to answer during that time.

 What do you need help with? It's a pretty simply part. I'm not going to give you the actual file of course, that you'll have to do on your own, but I get the feeling that's what you are trying to avoid....for whatever reason.

 

no6.JPG

New EE Logo.PNG


Inventor.PNG     vault.PNG



Jim
Celtic Design Services, LLC

Inventor/AutoCAD/Vault WorkGroups
Always for hire - celticdesign01ATyahooDOTcom
https://www.facebook.com/pages/Celtic-Design-Services-LLC/184666001666426
==========================================================
Please use the "Accept as Solution" and "Give Kudos" functions as appropriate to further enhance the value of these forums.

Go raibh maith agat (in other words...Thank you!)
*Expert Elite*
cwhetten
Posts: 1,090
Registered: ‎09-03-2008
Message 18 of 25 (265 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 11:53 AM in reply to: mrattray

mrattray wrote:

...I went to check my version to make sure and it updated itself to 12. Still see it.


Ha ha!  Mine did the same thing! :smileylol:

 

Still don't see it, though... :smileysad:

 

I posted about this issue on the Discussion Groups Feedback board here:

 

http://forums.autodesk.com/t5/Autodesk-Discussion-Groups/Attached-images-not-showing/m-p/3428479/mes...

*Expert Elite*
mrattray
Posts: 2,538
Registered: ‎09-13-2011
Message 19 of 25 (261 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 11:56 AM in reply to: cwhetten

My guess would be that you're missing an extension. Here's a cap of my extensions (and an excuse to test another image for you).

 

capture.jpg

Mike (not Matt) Rattray

Valued Mentor
Rich.O.3d
Posts: 526
Registered: ‎08-19-2008
Message 20 of 25 (228 Views)

Re: Can someone draw this in inventor 2012 for me?

04-24-2012 05:10 PM in reply to: mrattray

Im using chrome...i see your add-ins image but still dont see the op's image

 

I call our IT the 'Special Host Info Tech Dept...S.H.I.T. for short

We use HP to host our IT services (major Intnl company) they send us z800 workstations (about 12k worth of pc - quadro5000 cards xeon chips etc) but image the machines with XP so half the opengl instruction set doesnt work properly, dont even mention directx.

 

they block all streamed vid (cant even use the https trick) 

has anyone got anyidea what addins or patches i would need?

CAD Management 101:
You can do it your own way,
If its done just how I say!
[Metallica:And Justice For All:1988]
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.