Inventor General Discussion

Inventor General Discussion

Reply
Active Contributor
janlsing
Posts: 38
Registered: ‎09-28-2007
Message 1 of 3 (289 Views)

Calculation of paint area

289 Views, 2 Replies
11-08-2012 06:38 AM

Hi,

 

How can Inventor calculate the paint area of a one-side open container with a double bottom?

The container should be painted at the inside and outside.

But not the hollow space between the double bottom and the real bottom?

 

Kind regards

Jan

 

Valued Mentor
mpatchus
Posts: 476
Registered: ‎10-22-2008
Message 2 of 3 (276 Views)

Re: Calculation of paint area

11-08-2012 07:14 AM in reply to: janlsing

Two options...

 

  1. Select all of the surfaces that you want to include, RMB Measure Area.
  2.  Make the "hollow" portion of the double bottom the last element of the part.

Hollow Bottom 1.JPG

 

Now slide the EOP above the last element and bring up your iProperties.

 

Hollow Bottom 2.JPG

Mike Patchus

Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below. :smileyhappy:
*Expert Elite*
JDMather
Posts: 27,044
Registered: ‎04-20-2006
Message 3 of 3 (267 Views)

Re: Calculation of paint area

11-08-2012 07:18 AM in reply to: janlsing

You could even model the paint and get the volume of paint needed.

 

Derive Component as surface body and Thicken for the paint.

   (or do as multi-body solid)

What version of Inventor are you using (I can post a 2013 example).

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.