Inventor General Discussion

Inventor General Discussion

Reply
Contributor
rickardwahlstrom
Posts: 17
Registered: ‎10-09-2012
Message 1 of 17 (618 Views)
Accepted Solution

Building an compressor in inventor, need drawings !

618 Views, 16 Replies
10-09-2012 09:05 AM

Hello!

I'm having a school project now and i was thinking of constructing an compressor, presumably "air",, but yes.
But the problem is that i need 2D drawings for it so i can build it in 3D and then make it move and so on ! 

 It dont haft to be a compressor but i wanna construct something that will take around 80 hours. Something that is abit harder and that has an motion in it. couse it will be more fun to work with something that will have the ability to rotate.

So in my big need of help i'm asking you!

If anyone has either that kind of drawings or/and information and guidness to where i can find it for free, you will make my day!

I could make the drawings myself but dont know any messurements or its parts

Cheers! and i'll wait for you respone !

 

Most schools have a building called "The Library".

In that building there are these archives called "books".

My guess is that you could find one of these books that has what you need.

Hi rickardwahlstrom,

 

At the bottom of this link you'll see an UPDATE section that has a link to some Inventor Wizards projects that you might be interested in.

http://inventortrenches.blogspot.com/2011/03/modeling-practice-drawings-for-inventor.html

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com


rickardwahlstrom wrote:

Thank you Curtis for the links!...But i'm still in need of the drawings.

 

Any idéas?

 


There were a whole bunch of complete project drawings at the link at the bottom of the page as Curtis indicated.

Be sure to post back when you have any problems getting the assembly to work.

Looking forward to seeing your results - those projects look fun!

Distinguished Contributor
Ryan.Martinez
Posts: 141
Registered: ‎07-29-2011
Message 2 of 17 (601 Views)

Re: Building an compressor in inventor, need drawings !

10-09-2012 09:51 AM in reply to: rickardwahlstrom

www.grabcad.com

 

Tons of 3d models... maybe start there

PDS 2014
PDS 2015
Contributor
rickardwahlstrom
Posts: 17
Registered: ‎10-09-2012
Message 3 of 17 (590 Views)

Re: Building an compressor in inventor, need drawings !

10-09-2012 10:17 AM in reply to: Ryan.Martinez

Thank you! Very good! Let's just hope i can get de drawings and messurments out from an model now!

*Expert Elite*
JDMather
Posts: 27,516
Registered: ‎04-20-2006
Message 4 of 17 (578 Views)

Re: Building an compressor in inventor, need drawings !

10-09-2012 10:32 AM in reply to: rickardwahlstrom

Most schools have a building called "The Library".

In that building there are these archives called "books".

My guess is that you could find one of these books that has what you need.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
blair
Posts: 4,220
Registered: ‎11-13-2006
Message 5 of 17 (563 Views)

Re: Building an compressor in inventor, need drawings !

10-09-2012 10:39 AM in reply to: JDMather

Or just grab your tape measure and calipers and go to either a CAT Rental store and measure away. Tell them what you are doing and they will help you out.

 

Reverse engineering is a great skill to learn, it will help you out down the road. Many times one gets called to build a part from scratch to replace a component that can't easily be acquired.

 

Digital camera and a ruler, place the ruler on the item and take a picture. Bring it into Autocad and scale the picture till the ruler is the proper length, instant drawing.

 

Or as with some of our competitors, their version of R & D stands for: Replicate & Duplicate.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 340.52
SpacePilot Pro 3.17.7, 6.17., 4.11
Delta Tau Chi ΔΤΧ
Contributor
rickardwahlstrom
Posts: 17
Registered: ‎10-09-2012
Message 6 of 17 (546 Views)

Re: Building an compressor in inventor, need drawings !

10-09-2012 11:28 AM in reply to: blair

Yes, it is an great idéa !
But does anyone have or know any site where there is 2D drawings, with messures.

*Expert Elite*
blair
Posts: 4,220
Registered: ‎11-13-2006
Message 7 of 17 (534 Views)

Re: Building an compressor in inventor, need drawings !

10-09-2012 11:48 AM in reply to: rickardwahlstrom

Do you really think that manufactures that spend a great deal of money on the design, engineering and building of products are going to readily publish dimensioned drawings on the web for everyone to use?

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 340.52
SpacePilot Pro 3.17.7, 6.17., 4.11
Delta Tau Chi ΔΤΧ
*Expert Elite*
JDMather
Posts: 27,516
Registered: ‎04-20-2006
Message 8 of 17 (532 Views)

Re: Building an compressor in inventor, need drawings !

10-09-2012 11:53 AM in reply to: rickardwahlstrom

Go to the library.

Find a book on Technical Drafting.

Pick a project from the book that is within your modeling capabilities.  (forget the compressor)

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
Curtis_Waguespack
Posts: 2,955
Registered: ‎03-08-2006
Message 9 of 17 (529 Views)

Re: Building an compressor in inventor, need drawings !

10-09-2012 11:54 AM in reply to: rickardwahlstrom

Hi rickardwahlstrom,

 

At the bottom of this link you'll see an UPDATE section that has a link to some Inventor Wizards projects that you might be interested in.

http://inventortrenches.blogspot.com/2011/03/modeling-practice-drawings-for-inventor.html

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





*Expert Elite*
mrattray
Posts: 2,507
Registered: ‎09-13-2011
Message 10 of 17 (517 Views)

Re: Building an compressor in inventor, need drawings !

10-09-2012 12:16 PM in reply to: JDMather

JDMather wrote:

Most schools have a building called "The Library".

In that building there are these archives called "books".

My guess is that you could find one of these books that has what you need.


What's the URL for that? I can't seem to find it on Google.

 

Mike (not Matt) Rattray

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.