Inventor General Discussion

Inventor General Discussion

Reply
Active Member
viveksriramr
Posts: 9
Registered: ‎11-07-2012
Message 1 of 4 (744 Views)

border made for A4 sheet,now i Need for A3,A2 sheet

744 Views, 3 Replies
12-03-2012 05:20 AM

i made new borde for A4 sheet and now when i am shifting to A3 Or A1, border remains same as A4 sheet size only changing.kindly reffer the  image attached.Kindly solve

*Pro
jletcher
Posts: 1,972
Registered: ‎05-18-2011
Message 2 of 4 (729 Views)

Re: border made for A4 sheet,now i Need for A3,A2 sheet

12-03-2012 07:04 AM in reply to: viveksriramr

You would have to make a border for each size. Then if you want them to change automaticaly you will have to write some ilogic code to do this.


Please mark this response as "Accept as Solution" if it answers your question.

James Letcher
2012 Factory Design Suite ( will not load 2013)
What happen to my Inventor :-(
*Expert Elite*
JDMather
Posts: 27,040
Registered: ‎04-20-2006
Message 3 of 4 (719 Views)

Re: border made for A4 sheet,now i Need for A3,A2 sheet

12-03-2012 08:08 AM in reply to: viveksriramr

If you don't need for it to be fully automatic - the solution could be as simple as double clicking on the correct boarder in the Drawing Resources>Borders to change after-the-fact of creating or editing the sheet.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Pro
sbixler
Posts: 1,902
Registered: ‎09-15-2003
Message 4 of 4 (685 Views)

Re: border made for A4 sheet,now i Need for A3,A2 sheet

12-03-2012 06:03 PM in reply to: viveksriramr

In your border definition, you can dimension the border from the sheet corners.  This will allow it to stretch with the sheet size, as long as you don't mind

 

Since we stick pretty close to the ASME standards, though, which have differing border widths for different sheet sizes, we are not able to take advantage of this.  We have five different border definitions.

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.