Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Blurring text

5 REPLIES 5
Reply
Message 1 of 6
vernehmlassung
293 Views, 5 Replies

Blurring text

So I have a text embossed on a surface. I want to blur this text meaning, that there are no sharp edges of the embossed text anymore but a more fluent connection. Basically what curvature does(Press F). But curvature tries to find the same radius for every part of the embossed text and cannot find a common denominator for radius. In other words like a greyscale depth map with white text on black background becomes more one with the background by blurring it in 2D and therefore bringing top and bottom of the embossed text together. See picture.
5 REPLIES 5
Message 2 of 6

Message 3 of 6
Cadmanto
in reply to: vernehmlassung

Have you tried just adding chamfers or fillets to the text edges?

How much text are we talking?

 

check.PNGIf this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudoskudos.PNG are appreciated. Thanks!!!! Smiley Very Happy

 

New EE Logo.PNG

Inventor.PNG     vault.PNG

Best Regards,
Scott McFadden
(Colossians 3:23-25)


Message 4 of 6
vernehmlassung
in reply to: Cadmanto

That's exactly what I tried. I've the german version so the translation is different. Just try it with smaller text and you'll never find a suitable radius.
Message 5 of 6
mcgyvr
in reply to: vernehmlassung

Can you use "extrude with taper" instead of emboss?

Or maybe "decal"



-------------------------------------------------------------------------------------------
Inventor 2023 - Dell Precision 5570

Did you find this reply helpful ? If so please use the Accept Solution button below.
Maybe buy me a beer through Venmo @mcgyvr1269
Message 6 of 6
Cadmanto
in reply to: vernehmlassung

I don't understand why the German version would be different, but I will take your word for it.

While I am not much of an iLogic guru, when it comes to odd things like this with no visible solution, makes me wonder if iLogic would work to give you the desired results.

 

check.PNGIf this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudoskudos.PNG are appreciated. Thanks!!!! Smiley Very Happy

 

New EE Logo.PNG

Inventor.PNG     vault.PNG

Best Regards,
Scott McFadden
(Colossians 3:23-25)


Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report