Inventor General Discussion

Inventor General Discussion

Reply
Member
niels_de_valck
Posts: 4
Registered: ‎11-07-2012
Message 1 of 3 (218 Views)
Accepted Solution

Bike: Weldments

218 Views, 2 Replies
11-07-2012 01:17 PM

I'm trying to make a bike, but I want to use some weldments on the frame. I've already placed 2 weldments, but I can't find out how to place the third weldment. I wanted to use a groove weldment, but it doesn't work. I have already done a groove weldment on the frame, so I don't understand why the otherone doesn't work. 

 

I just learnt a bit how to use weldments, but i can't find much information how to use it. I'll place my testframe in attachments. I hope someone can help me fix this or explain me what's the problem and how I should use weldments.

 

Thanks

Use Groove weld.

Follow steps shown in picture (see below).

 

1. Select face of tube

2. Select face of other tube,

3. Radial Fill.

Apply.

 

bikeweld.png

 

bikeweld2.png

Valued Mentor
GSE_Dan_A
Posts: 311
Registered: ‎10-06-2011
Message 2 of 3 (206 Views)

Re: Bike: Weldments

11-07-2012 01:47 PM in reply to: niels_de_valck

Use Groove weld.

Follow steps shown in picture (see below).

 

1. Select face of tube

2. Select face of other tube,

3. Radial Fill.

Apply.

 

bikeweld.png

 

bikeweld2.png

GSE Consultants Inc.
Windsor, ON. Canada
Member
niels_de_valck
Posts: 4
Registered: ‎11-07-2012
Message 3 of 3 (196 Views)

Re: Bike: Weldments

11-07-2012 02:18 PM in reply to: GSE_Dan_A

Thanks a lot!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.