Inventor General Discussion

Inventor General Discussion

Reply
*Expert Elite*
4,374 Posts
517 Kudos
Registered: ‎04-27-2005
Post 41 of 98

Re: Benchmark for Autodesk Inventor 2012

11-04-2011 09:08 AM in reply to: prusas

Here is my results for the 1000.iam test.  I compared 2011 and 2012.  Same machine.. similar application option settings.  If 15 is the refresh rate we are after, 2011 would do about 650 parts, 2012 is down to 525. A drop of about 20%.

 

Refresh_Rates_Results.png

*Expert Elite*
7,331 Posts
658 Kudos
Registered: ‎12-01-2004
Post 42 of 98

Re: Benchmark for Autodesk Inventor 2012

11-04-2011 12:10 PM in reply to: karthur1

ah ha.. Got it.. (Display Silhouettes should be turned off)

400 parts 15.2Hz refresh rate at 1920 x 1080 resolution. (quality hardware mode)

400 parts 15.8Hz refresh rate at 1920 x 1080 resolution. (performance hardware mode)

400 parts 15.95Hz refresh rate at 1920 x 1080 resolution (compatibility hardware mode)

 

 I had "display silhouettes" turned on (default is off). As soon as I turned it off I went from 200 to 400 parts at 15Hz..

:smileyvery-happy:

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


Distinguished Contributor
139 Posts
1 Kudo
Registered: ‎12-08-2003
Post 43 of 98

Re: Benchmark for Autodesk Inventor 2012

11-04-2011 12:46 PM in reply to: mcgyvr

Silhouettes are turned on in both 2010 and 2012 in the results I show below.

 

IV2012 is still a dog when compared to IV2012 D3D 10.

 

However I did 500 parts with sihlouettes off in IV 2012, here are the quick results:

 

Quality, 500 parts, 1920 x 1200  16.39 Hz

 

Performance, 500 parts, 1920 x 1200 16.67 Hz

 

Compatability, 500 Parts, 1920 x 1200 16.95 Hz.

 

Also, I have dual 1920 x 1200 displays, not sure how that affects results since the only part of Inventor on the second monitor is the browser bar.

 

 

 

 

Contributor
26 Posts
23 Kudos
Registered: ‎09-16-2008
Post 44 of 98

Re: Benchmark for Autodesk Inventor 2012

11-04-2011 12:58 PM in reply to: mcgyvr

... Just to add to the numbers 

Hits 15 Hz at 400 parts, although I noticed that if zoomed in the Hz went up.  Evens out at 15-ish after the entire assembly is in view and spinning.  Zooming out further doesn't change anything.  

 

my vital statistics...

Windows 7 64 bit
Intel® Core™ i7 CPU 860 @ 2.8GHz; RAM 8Gb
Hard drive (300 GB)
NVIDIA Quadro 4000; Samsung SyncMaster 2343 - 2048 x 1142

Valued Contributor
56 Posts
8 Kudos
Registered: ‎04-02-2011
Post 45 of 98

Re: Benchmark for Autodesk Inventor 2012

11-05-2011 03:09 AM in reply to: vandargo

Summary of interim results

Capture.PNG

Windows 7 64 bit
Intel® Core™ i7 CPU X 990 @ 3,9; RAM 12Gb x 1600
OCZ-Vertex 4 SSD (119.24GB)
Asus NVIDIA GeForce GTX 580; PLE2607WS 1920x1200
Valued Contributor
56 Posts
8 Kudos
Registered: ‎04-02-2011
Post 46 of 98

Re: Benchmark for Autodesk Inventor 2012

11-05-2011 07:35 AM in reply to: prusas

During the summary, there was a suspicion that there may be misread the data. Therefore, if you have the opportunity, please submit the test data in a form.

Capture.PNG

Windows 7 64 bit
Intel® Core™ i7 CPU X 990 @ 3,9; RAM 12Gb x 1600
OCZ-Vertex 4 SSD (119.24GB)
Asus NVIDIA GeForce GTX 580; PLE2607WS 1920x1200
Active Contributor
49 Posts
4 Kudos
Registered: ‎07-27-2007
Post 47 of 98

Re: Benchmark for Autodesk Inventor 2012

11-05-2011 08:34 AM in reply to: prusas

And that test is more reliable? "Inventor 6 bench" is like a kinder for us...

_______________________________________________________
Windows7 64b; GIGABYTE EX58-UD5; Intel Core i7 920 (2.66GHz)
DDR3 3x2GB Kingston, HD ST 750GB+320GB
NVIDIA Quadro FX1800 (1680x1050) + SpacePilot PRO
APDSUltimate 2014
Valued Contributor
56 Posts
8 Kudos
Registered: ‎04-02-2011
Post 48 of 98

Re: Benchmark for Autodesk Inventor 2012

11-05-2011 09:43 AM in reply to: malenki

300 part -

Shaded

manual                    32Hz

Inventor 6 bench    36,5Hz

Hiden                     

manual                    4,9Hz

Inventor 6 bench    8,8Hz

 Wireframe

manual                    27Hz

Inventor 6 bench    26,6Hz


but "Inventor 6 bench" exactly the same is not valid for all users




Windows 7 64 bit
Intel® Core™ i7 CPU X 990 @ 3,9; RAM 12Gb x 1600
OCZ-Vertex 4 SSD (119.24GB)
Asus NVIDIA GeForce GTX 580; PLE2607WS 1920x1200
Valued Contributor
56 Posts
8 Kudos
Registered: ‎04-02-2011
Post 49 of 98

Re: Benchmark for Autodesk Inventor 2012

11-05-2011 11:09 AM in reply to: prusas

interesting coincidences

Capture1.PNG

Windows 7 64 bit
Intel® Core™ i7 CPU X 990 @ 3,9; RAM 12Gb x 1600
OCZ-Vertex 4 SSD (119.24GB)
Asus NVIDIA GeForce GTX 580; PLE2607WS 1920x1200
Valued Contributor
77 Posts
7 Kudos
Registered: ‎12-05-2006
Post 50 of 98

Re: Benchmark for Autodesk Inventor 2012

11-05-2011 11:19 AM in reply to: karthur1

I ran my home PC to see how it handled the same.

 

I got approx. 460 parts (shaded with edges) at 15Mhz.

 

System is the following

 

AMD Athlon II X3 445 3.11Ghz

8GB DDR1600

NVIDIA GTX 560 Superclocked 2GB

1680x1050 Resolution

Windows 7 x64

Michael Benoy
Designer
Scott Safety

Inventor 2013 Pro, Windows 7, 64bit
Intel® Xeon® Processor W3580 (8M Cache, 3.33 GHz)
12 GB DDR3, NVIDIA Quadro FX 3800
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!