Inventor General Discussion

Reply
Valued Contributor
riff62
Posts: 52
Registered: ‎02-25-2009
Message 11 of 27 (170 Views)

Re: AU 2013!

10-21-2013 04:13 AM in reply to: kat.ingalls

Its been a bit of a struggle, but I will be there again this year as well...Looking forward to meeting more people this year. Last year was my first year, and I was alittle overwhelmed..

Since everyone in my immediate family will be working on Thanksgiving through the weekend, (Nursing and Retail) I will be leaving on Turkey day and coming back on the 6th. A few extra days to...uh..attend bible study..:smileywink:







 

*Expert Elite*
cbenner
Posts: 3,315
Registered: ‎04-06-2010
Message 12 of 27 (154 Views)

Re: AU 2013!

10-21-2013 05:50 AM in reply to: PaulMunford

What class are you teaching, Paul?  I think I looked at it, but it seems like it didn't fit my schedule... might have to check it out online after the conference.

ChrisB

ADSK_Expert_Elite_Icon_S_Color_Blk.png

Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Thank you! :smileyhappy:

http://cbennertipstricks.blogspot.com/


   

Valued Mentor
mpatchus
Posts: 492
Registered: ‎10-22-2008
Message 13 of 27 (153 Views)

Re: AU 2013!

10-21-2013 06:02 AM in reply to: kat.ingalls

Looks like my boss has had a change of heart and given me the okay to attend this year.

(Actually I think he got a free pass and found out he couldn't fit it in his schedule.)

 

Mike Patchus

Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below. :smileyhappy:
*Expert Elite*
JDMather
Posts: 27,499
Registered: ‎04-20-2006
Message 14 of 27 (138 Views)

Re: AU 2013!

10-21-2013 08:17 AM in reply to: riff62

riff62 wrote:
 A few extra days to...uh..attend bible study..:smileywink:

Take a couple of days to visit the Grand Canyon or Death Valley NP.





 


 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Valued Contributor
riff62
Posts: 52
Registered: ‎02-25-2009
Message 15 of 27 (127 Views)

Re: AU 2013!

10-21-2013 09:26 AM in reply to: JDMather
I was thinking of going to one of those actually..wanted to see the Dam as well. Of course ...a young(ish) impressionable lad left to his own devices in the bright lights of Sin City...no telling what nefarious evil may lurk in the shadows for this intrepid boy..As long as I don't have to call my wife for bail, I will be ok..ha
*Expert Elite*
JDMather
Posts: 27,499
Registered: ‎04-20-2006
Message 16 of 27 (121 Views)

Re: AU 2013!

10-21-2013 09:47 AM in reply to: riff62

riff62 wrote:
I was thinking of going to one of those actually..wanted to see the Dam as well.
...

Yes, I meant to mention that.  The Hoover Dam and the new bridge are fairly close to Las Vegas (I think about 30 miles).  The Grand Canyon or Death Valley (opposite direction) are a full days drive away.  If you go to the Grand Canyon - the Hoover Dam is on the way there.  Plan to spend at least 3 hrs there (arrive early, very very early (or late)).  The parking is free on the Arizona side, then walk back across.  The parking for the new bridge is about half mile before the dam.

 

Warning: the rim of the Grand Canyon is actually at a fairly high elevation and it can be cold in Dec., but they have a great welcome. :smileyvery-happy: http://home.pct.edu/~jmather/IMAGES/JM%20RM%20at%20Mather%20Point.JPG

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Distinguished Contributor
Ryan.Martinez
Posts: 141
Registered: ‎07-29-2011
Message 17 of 27 (114 Views)

Re: AU 2013!

10-21-2013 09:52 AM in reply to: riff62

If you have never seen the Grand Canyon, its a must.

PDS 2014
PDS 2015
Valued Contributor
riff62
Posts: 52
Registered: ‎02-25-2009
Message 18 of 27 (108 Views)

Re: AU 2013!

10-21-2013 10:16 AM in reply to: JDMather
Thanks for the advice...I appreciate it...I will try to do one of the suggestions..I am sure I will have schoolwork to do..I am taking 4 classes this semester and finals are right after AU. Some May question the wisdom of going to AU at all, but I spoke with my instructors and they are waiving certain things I would normally need to do during that time, but not everything.. Working here at the Lab full time and taking on a heavy course load makes me question my sanity..
Alumni
kat.ingalls
Posts: 263
Registered: ‎03-04-2013
Message 19 of 27 (99 Views)

Re: AU 2013!

10-21-2013 11:56 AM in reply to: mpatchus

Thats fantastic news! Really happy to hear that. Excited to see so many of you guys looking forward to attending!

Kat

Fusion 360 Social & Community Manager
twitter: @adskFusion360
facebook: /fusion360
Valued Mentor
GSE_Dan_A
Posts: 305
Registered: ‎10-06-2011
Message 20 of 27 (90 Views)

Re: AU 2013!

10-21-2013 12:20 PM in reply to: kat.ingalls

Would be awfully nice to go to one of these, but I don't think I have the chance to.  Working for a  small company, its not easy to convince the boss to put up funds for these types of things. To those that are going, have fun and share your experience!

GSE Consultants Inc.
Windsor, ON. Canada
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.