Inventor General Discussion

Reply
Member
alon
Posts: 5
Registered: ‎02-04-2008
Message 1 of 5 (331 Views)

Assembly - parts not visible

331 Views, 4 Replies
05-11-2012 12:26 AM

Hi,

 

I'm working on a small Assy (25 parts). When I open one of the parts from this Assy and work on it then go back to the Assy many parts are not visible. The update button is usually off so I can't use it.

 

This started only about 2-3 weeks ago - in every assy. I changed the nvidia driver but didn't help.

 

Any idea how to fix this?


Inventor pro 2012

Win 7 Pro. sp1 64 bit

Intel Core I7-2600 CPU

Ram - 8GB

Quadro 2000 D

Nvidia 275.89 (tested nvidia 296.70 with no luck)

 

*Expert Elite*
JDMather
Posts: 26,840
Registered: ‎04-20-2006
Message 2 of 5 (324 Views)

Re: Assembly - parts not visible

05-11-2012 02:54 AM in reply to: alon

alon wrote:

 Assy many parts are not visible.  


Attach assembly with two parts - one that is still visible and one that is not visible exhibiting the behavior you describe.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
Cadmanto
Posts: 3,264
Registered: ‎12-07-2011
Message 3 of 5 (318 Views)

Re: Assembly - parts not visible

05-11-2012 05:32 AM in reply to: alon

Try using the rebuild all command and see if that helps.

 

rebuild.JPG

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

Member
alon
Posts: 5
Registered: ‎02-04-2008
Message 4 of 5 (298 Views)

Re: Assembly - parts not visible

05-14-2012 02:32 AM in reply to: JDMather

Thank you.

 

I'm attaching 2 pdf files that show the problem. This is what I get on any assy I work on.

The no. 1 file is the assy before I started working on parts and no. 2 is what I get when I go back to the Assy.

 

I tried using "Rebuild All " as Scott wrote and it works - all the parts are visible again. I still would like to know what happened that caused this problem in the last 3 weeks

 

Thanks

Alon

 

Member
alon
Posts: 5
Registered: ‎02-04-2008
Message 5 of 5 (297 Views)

Re: Assembly - parts not visible

05-14-2012 02:34 AM in reply to: Cadmanto

Thank you, it works but I still would like to know what happened.

 

Alon

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.