Inventor General Discussion

Inventor General Discussion

Reply
Member
5 Posts
0 Kudos
Registered: ‎02-04-2008
Post 1 of 5

Assembly - parts not visible

358 Views, 4 Replies
05-11-2012 12:26 AM

Hi,

 

I'm working on a small Assy (25 parts). When I open one of the parts from this Assy and work on it then go back to the Assy many parts are not visible. The update button is usually off so I can't use it.

 

This started only about 2-3 weeks ago - in every assy. I changed the nvidia driver but didn't help.

 

Any idea how to fix this?


Inventor pro 2012

Win 7 Pro. sp1 64 bit

Intel Core I7-2600 CPU

Ram - 8GB

Quadro 2000 D

Nvidia 275.89 (tested nvidia 296.70 with no luck)

 

*Expert Elite*
28,607 Posts
2,122 Kudos
Registered: ‎04-20-2006
Post 2 of 5

Re: Assembly - parts not visible

05-11-2012 02:54 AM in reply to: alon

alon wrote:

 Assy many parts are not visible.  


Attach assembly with two parts - one that is still visible and one that is not visible exhibiting the behavior you describe.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
3,370 Posts
1,273 Kudos
Registered: ‎12-07-2011
Post 3 of 5

Re: Assembly - parts not visible

05-11-2012 05:32 AM in reply to: alon

Try using the rebuild all command and see if that helps.

 

rebuild.JPG

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

Member
5 Posts
0 Kudos
Registered: ‎02-04-2008
Post 4 of 5

Re: Assembly - parts not visible

05-14-2012 02:32 AM in reply to: JDMather

Thank you.

 

I'm attaching 2 pdf files that show the problem. This is what I get on any assy I work on.

The no. 1 file is the assy before I started working on parts and no. 2 is what I get when I go back to the Assy.

 

I tried using "Rebuild All " as Scott wrote and it works - all the parts are visible again. I still would like to know what happened that caused this problem in the last 3 weeks

 

Thanks

Alon

 

Member
5 Posts
0 Kudos
Registered: ‎02-04-2008
Post 5 of 5

Re: Assembly - parts not visible

05-14-2012 02:34 AM in reply to: Cadmanto

Thank you, it works but I still would like to know what happened.

 

Alon

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post