Inventor General Discussion

Inventor General Discussion

Reply
Member
Fefas
Posts: 3
Registered: ‎03-07-2012
Message 1 of 5 (160 Views)
Accepted Solution

Assemble Multiple leds on matrix

160 Views, 4 Replies
09-26-2012 06:02 AM

Guys,

 

I am assembling multiples leds on a matrix that I made.

 

Is there any way to make the assembly using constrains to place the ipt LED design on the matrix without placing one by one?

 

The constrain I am using for each led is Insert.

 

There got to be a way to insert the leds directly, like when you are placing screws and it detects all holes and places the necessary number os screws on the existing holes.

 

Any Idea will be aprecciated.

 

Thanks

 

Fefas

Fefas,

Have you looked into patterning?

pattern.JPG

*Expert Elite*
Cadmanto
Posts: 3,320
Registered: ‎12-07-2011
Message 2 of 5 (155 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 06:13 AM in reply to: Fefas

Fefas,

Have you looked into patterning?

pattern.JPG

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

*Expert Elite*
JDMather
Posts: 27,504
Registered: ‎04-20-2006
Message 3 of 5 (142 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 07:32 AM in reply to: Fefas

If you created the holes in the original part with a Feature Pattern you can use that same part Feature Pattern to place the LEDs in the assembly.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
Fefas
Posts: 3
Registered: ‎03-07-2012
Message 4 of 5 (140 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 08:08 AM in reply to: Cadmanto

Thanks Scott,

 

It worked. I don't know how I haven't noticed that on the assembly I could use the patter tool.

 

Thanks

*Expert Elite*
Cadmanto
Posts: 3,320
Registered: ‎12-07-2011
Message 5 of 5 (133 Views)

Re: Assemble Multiple leds on matrix

09-26-2012 08:12 AM in reply to: Fefas

We all over look things at time.  Glad it was that easy.

Best Regards,
Scott McFadden
Inventor Professional 2014
(Colossians 3:23-25)

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.