Inventor General Discussion

Reply
*Maenpaa, Mike
Message 1 of 6 (131 Views)

Adding trail problem in IPN

131 Views, 5 Replies
11-01-2002 12:48 AM
Has anyone ever come up with a solution to this? I'm experiencing the same
problem. See .jpg in Customer Files.
Mike

"Derek" wrote in message
news:6270C3897DD10962F6A2FE2855C3D54E@in.WebX.maYIadrTaRb...
> The other thing is after I did what you told me to do, I zoom all and I
> found those trails but they were about twenty feet from the location of
> where I want the trails to be...
>
> Derek
>
> "KJohnson" wrote in message
> news:43DBECCF4127B9C89A38E11B0875148E@in.WebX.maYIadrTaRb...
> > You need to unhide trails. Then rmb the trail you don't won't and click
> > visible. The other option is to define the trail origin when making the
> > tweak in the first place. Good luck
> >
> > Kathy Johnson
> > "Derek" wrote in message
> > news:90E3A83034ECBB5B28A55D4CD3CBE12B@in.WebX.maYIadrTaRb...
> > > I already look thru the posts from awhile ago but that didn't solve my
> > > problem. I need to know how can I add trail to a different location on
> the
> > > sub assembly such as the hole instead of the center of the part. First
> of
> > > all, I did the tweaking without the Display Trail checked. Then I went
> to
> > > add trail from the center of hole but it never appeared... Can anyone
> tell
> > > me what I am doing wrong?
> > >
> > > Thanks,
> > > Derek Sevier
> > > Mechanical Engineer
> > > Quality Corporation
> > > 2401 S Delaware St.
> > > Denver, CO 80223
> > > derek.s@donkeyforklift.com
> > > Fax: 303-777-6488
> > >
> > >
> >
> >
>
>
*McConnell, Cory
Message 2 of 6 (131 Views)

Re: Adding trail problem in IPN

11-01-2002 01:09 AM in reply to: *Maenpaa, Mike
Yes . Don't know how to fix it. I think it might have something to do with
previous tweaks?

--
Cory McConnell
BJ Pipeline Inspection
*Maenpaa, Mike
Message 3 of 6 (131 Views)

Re:

11-01-2002 01:09 AM in reply to: *Maenpaa, Mike
There were no other tweaks in this case. I started from scratch.
Mike

"Cory McConnell" wrote in message
news:87368E24E8D53DDAB47827F3EE4B928F@in.WebX.maYIadrTaRb...
> Yes . Don't know how to fix it. I think it might have something to do
with
> previous tweaks?
>
> --
> Cory McConnell
> BJ Pipeline Inspection
>
>
*McConnell, Cory
Message 4 of 6 (131 Views)

Re:

11-01-2002 01:18 AM in reply to: *Maenpaa, Mike
There goes that theory. I have probably never tried to add a trail to the
first tweak.

--
Cory McConnell
BJ Pipeline Inspection
*Maenpaa, Mike
Message 5 of 6 (131 Views)

Re:

11-01-2002 01:18 AM in reply to: *Maenpaa, Mike
Ok, I just figured out a workaround for my case. The part I was tweaking was
actually a sub because of the PEMS. I tweaked all the parts separate (but
the same distance) and added the trails to the PEMS. Trails now appear like
I want them.
Mike

"Cory McConnell" wrote in message
news:8AB4976FA4B2AC873E446E5D2EE3C9ED@in.WebX.maYIadrTaRb...
> There goes that theory. I have probably never tried to add a trail to
the
> first tweak.
>
> --
> Cory McConnell
> BJ Pipeline Inspection
>
>
*McConnell, Cory
Message 6 of 6 (131 Views)

Re:

11-01-2002 01:36 AM in reply to: *Maenpaa, Mike
I usually end up fooling around until I get around it. Sorry I couldn't
help.

--
Cory McConnell
BJ Pipeline Inspection
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.