Inventor General Discussion

Inventor General Discussion

Reply
Distinguished Contributor
luiww
Posts: 122
Registered: ‎08-09-2010
Message 1 of 2 (242 Views)

Access denied

242 Views, 1 Replies
11-16-2012 08:25 PM

I have the problem with a message, access denied.  Attached is the screen shot of the message as well as the ipt file.  The part file is also created by me then but not able to amend it now.

*Expert Elite*
blair
Posts: 4,440
Registered: ‎11-13-2006
Message 2 of 2 (225 Views)

Re: Access denied

11-17-2012 02:02 PM in reply to: luiww

Possibly you are trying to do a "Save-As" while the part is still being accessed by the Assembly file IAM. You would need to close the assembly to do a "Save-As".

 

Looks like you opened the assembly, selected one of the parts within the assembly to edit and are trying to change the name of the part with the Save-As command. You should be using the "Save Copy As" command for this work method.

 

If you closed all the files and just opened this single IPT file then your method of the "Save-As" would work.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

IV2015 SP1 PDSU / Sim Mech 2015 r1 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 344.75
SpacePilot Pro 10.2.0 / 17.2.0.11011 / 4.17
Delta Tau Chi ΔΤΧ
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.