Inventor General Discussion

Inventor General Discussion

Reply
Member
Megakuk
Posts: 3
Registered: ‎05-24-2012
Message 1 of 4 (194 Views)

3D Sketch

194 Views, 3 Replies
06-06-2012 07:08 AM

Can you guys please fire the guy who programmed the 3D sketch tool? Its probably the worst tool I ever used and you can't really create a good constrained sketch with it. Nobody at this company or anyone I know, wants to use this due to its over complicated layout/lack of intelligence. I want to kill myself every time I need to use it.

 

Best Regards

Benny Kristiansson

*Expert Elite*
JDMather
Posts: 28,208
Registered: ‎04-20-2006
Message 2 of 4 (178 Views)

Re: 3D Sketch

06-06-2012 09:10 AM in reply to: Megakuk

3D sketches work fine.

Nearly every 3D sketch I create is actually constrolled with 2D sketches.

Very easy to create.

Very easy to control.

Very easy to edit.

Rock solid.

 

Attach your file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
Megakuk
Posts: 3
Registered: ‎05-24-2012
Message 3 of 4 (149 Views)

Re: 3D Sketch

06-06-2012 11:28 PM in reply to: JDMather

Well I've used this to create 3D sketches with Frame Generator but in this case I'm trying to create an pipe with complicated geometry. And that is not an easy task when you have to create an 2D sketch for every change of direction. 3D sketch should be able to be edited in a similar way as 2D sketches but it isn't even close. Maybe you can give me an link how to create an complicated pipe?

*Expert Elite*
JDMather
Posts: 28,208
Registered: ‎04-20-2006
Message 4 of 4 (138 Views)

Re: 3D Sketch

06-07-2012 04:36 AM in reply to: Megakuk

Megakuk wrote:

 And that is not an easy task when you have to create an 2D sketch for every change of direction.



Works very easily here.  Post your example done your hard way.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.