Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

2013 Dual screen: Jumping browser from right screen to middle of left screen

4 REPLIES 4
SOLVED
Reply
Message 1 of 5
WHolzwarth
1866 Views, 4 Replies

2013 Dual screen: Jumping browser from right screen to middle of left screen

Has anyone else the same problem?

I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.

In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.

Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.

 

Smiley Mad You surely can imagine, how much I'm liking that ..

Walter Holzwarth

EESignature

4 REPLIES 4
Message 2 of 5
sam_m
in reply to: WHolzwarth

http://forums.autodesk.com/t5/Autodesk-Inventor/I-wished/td-p/3941168

 

Some comments about it there.

 

(also ATI Fire GPU... interesting...)



Sam M.
Inventor and Showcase monkey

Please mark this response as "Accept as Solution" if it answers your question...
If you have found any post to be helpful, even if it's not a direct solution, then please provide that author kudos - spread that love 😄

Message 3 of 5
sam_m
in reply to: sam_m

as a thought....

 

check your driver options and is there anything about dialog-box repositioning (turn off) and/or preserve application position (turn on).

 

Could the gpu drivers be flinging the browser bar back to the primary monitor if it thinks it's a (new?) dialog box?



Sam M.
Inventor and Showcase monkey

Please mark this response as "Accept as Solution" if it answers your question...
If you have found any post to be helpful, even if it's not a direct solution, then please provide that author kudos - spread that love 😄

Message 4 of 5
WHolzwarth
in reply to: sam_m

That did it, Sam. See attached my new Catalyst Pro CC settings.

 

Many thanks

Walter

Walter Holzwarth

EESignature

Message 5 of 5

Many thanks to Sam M and Walter for this cure to a frustrating problem.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report