2013 - Controlling the weld visibility in iAssemblies

[karthur1]

I have made a family of weldments.  I am having trouble controlling the visibility of the weld symbols when I place one of these members. On some members the welds are shown and on others they are not.  I know that I can turn off all the welds (View>Object Visibility> Weld Symbols) but there are other weld symbols in the assembly that I need/want to leave visible. In the image below all three weldments have the same welds, but the weld symbol of only the one is shown when I place it in an iam.

In each member of the iassembly, I have unchecked the visibility under the Welds node, but some are still visible when i place them, so that must not be controlling it.

Sure would be good if visibility of welds were controlled by view representation.

Kirk A.

Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1
Vault Basic 2013

[4donwan4]

Not sure if we are looking at a product issue here. I will contact you through a support case.

Regards,

Don