Inventor General Discussion

Inventor General Discussion

Reply
Contributor
kerthivasan
Posts: 25
Registered: ‎03-08-2011
Message 1 of 6 (286 Views)
Accepted Solution

1 D Stress Analysis

286 Views, 5 Replies
09-24-2011 07:52 PM

Hi.
As a part of my course, I am supposed to do 1 D stress analysis.

It was possible in ANSYS.

 

But how to do that in AD Inventor? (I can do basic 3 D stress analysis, bu I need to know how to do 1D)

 

So, is it possible in AD Inventor 2011 or only 3 D stress analysis is possible?

 

Thanks in advance for your reply.

What is the design geometry - can you post an example file?

Are you familiar with the Design Accelerators - beam/column/plate?

You might want to check out the FEA in AutoCAD Mechanical.

*Expert Elite*
JDMather
Posts: 28,228
Registered: ‎04-20-2006
Message 2 of 6 (276 Views)

Re: 1 D Stress Analysis

09-25-2011 09:20 AM in reply to: kerthivasan

What is the design geometry - can you post an example file?

Are you familiar with the Design Accelerators - beam/column/plate?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2015 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015-SP1 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
kerthivasan
Posts: 25
Registered: ‎03-08-2011
Message 3 of 6 (237 Views)

Re: 1 D Stress Analysis

09-27-2011 01:19 AM in reply to: JDMather

Hi.
 

My problem is, there is a beam hanging vertically, to which an axial force of 100N is applied.
Now I have to find out the elongation using 1D spar element in ANSYS.
I have to do it as 1D only.
So in ANSYS I will first select the spar element, then draw a line whose length will be same
as that of the beam and th cross-sectional area of the beam is entered seperately in a dialog box that corresponds to the 1D spar element.

So, my question is to know whether I can do it in Autodesk Inventor or not?

Please see the picture at http://www.mece.ualberta.ca/tutorials/ansys/BT/Truss/images/Lines.gif

It is simillar to this, i need to model in Autodek Inventor. I am aware that the truss can be modelled in 3 D.

Also view http://www.mece.ualberta.ca/tutorials/ansys/IT/Density/images/Deform.gif

Thank you.

Distinguished Contributor
kstate92
Posts: 908
Registered: ‎05-09-2005
Message 4 of 6 (226 Views)

Re: 1 D Stress Analysis

09-27-2011 05:01 AM in reply to: kerthivasan

You might want to check out the FEA in AutoCAD Mechanical.

KState92
Inventor Professional 2014 64 SP2
Windows 7 Pro 64 bit - SP1
Xeon E5-1620
16 GB Ram
Quadro 4000
Contributor
kerthivasan
Posts: 25
Registered: ‎03-08-2011
Message 5 of 6 (180 Views)

Re: 1 D Stress Analysis

10-10-2011 07:23 PM in reply to: kstate92

Thank you very much.  This was what I was expecting.

Contributor
kerthivasan
Posts: 25
Registered: ‎03-08-2011
Message 6 of 6 (179 Views)

Re: 1 D Stress Analysis

10-10-2011 07:24 PM in reply to: JDMather

Thank you very much.  This was what I expected.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.