Inventor Fusion

Posts: 4
Registered: ‎01-01-2013
Message 1 of 3 (380 Views)
Accepted Solution

Put a cylinder in a hole

380 Views, 2 Replies
01-02-2013 12:43 AM



I've just started with Inventor Fusion 2013 and I'm stuck with basic things.

I want to put a tube inside a box. 

I drilled inside the box a hole at the same diameter as the extern diameter of the tube.

I tried to assembly them with " Assembly" tool but I didn't succeed in it. Either way, nothing happen or the button OK appears unclickeable.


If someone can show me how to solve that or a tutorial (I searched and I didn't find something)

Thank you in advance



*Expert Elite*
Posts: 26,584
Registered: ‎04-20-2006
Message 2 of 3 (374 Views)

Re: Put a cylinder in a hole

01-02-2013 04:13 AM in reply to: NassimJ

check if there is any information here that will help

Please mark this response as "Accept as Solution" if it answers your question.
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
Posts: 90
Registered: ‎08-07-2011
Message 3 of 3 (334 Views)

Re: Put a cylinder in a hole

01-17-2013 10:55 PM in reply to: NassimJ

I open your file, just find only root component in it.

In Fusion, if you want to assemble two parts, you need to create them as two components before assemble.

There's a choice when you create a part, select the "New Component".

I also attached a model to show you the result.

Go ahead to try it!



SQA Engineer
Fusion 360 Quality Assurance Team
Autodesk, Inc.

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.