Inventor Fusion

Active Member
Posts: 9
Registered: ‎05-19-2011
Message 1 of 3 (231 Views)

Inventor Fusion Virtual Topologie

231 Views, 2 Replies
08-10-2011 02:39 AM

Is it possible to simbly models with virtual topologie by using inventor Fusion? What I mean is, is it possible for example to suppress edges to simplify the model that it´s easier for the mesher to create the mesh?

Posts: 14
Registered: ‎06-13-2011
Message 2 of 3 (196 Views)

Re: Inventor Fusion Virtual Topologie

08-12-2011 09:36 AM in reply to: harald.kreidner

Have you tried the Simplify command? It can remove constant radius fillets, chamfers with equal leg lengths, and holes. Simplify doesn't analyze the model, so you need to have features in the browser. If you don't have features, you can use the Feature Recognition command to identify model features. Both commands are on the Manage panel.


You can also use Delete. It will remove the selected faces and heal the body by extending the neighboring faces. Delete is on the Solids panel. Delete Face is on the Surfaces panel, and it will just remove the face so you can create new geometry.



Loren Jahraus
Subject Matter Expert/Technical Writer- Inventor Fusion
Product Support
Posts: 570
Registered: ‎11-23-2005
Message 3 of 3 (194 Views)

Re: Inventor Fusion Virtual Topologie

08-12-2011 09:58 AM in reply to: adsk_loren

Here is a screenshot on what the Delete command can do for you.

It is extremely powerful in combination with the Protrusion or Depression selection filters.

The only thing to be aware of is that the Delete command is working kind of backwards.
You first select the geometry you want to work with and only THEN you select the Delete command.






Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.