Inventor Fusion

Inventor Fusion

Reply
New Member
amro.samy93
Posts: 1
Registered: ‎06-30-2012
Message 1 of 7 (2,780 Views)

inventor fusion 2013 Runtime Error! Please repair or reinstall the program.

2780 Views, 6 Replies
06-30-2012 08:23 AM

Runtime Error! Please repair or reinstall the program.


    We’re sorry, there was an error while initializing the graphics subsystem.  This is likely due to one or more of the following:  your graphics driver is not configured for "True Color", there was a problem installing the application, the application installation was damaged, or some other problem with the graphics hardware and drivers or the configuration of the application.  More detailed information may be included below.

 

 

My device is : Dell Inespiron N5110

Processor: Core i7-2670QM CPU @ 2.20 GHz

RAM: 8GB

GPU: NVIDIA GeForce GT 525M     1 GB

HDD: 1TB ,    40GB free of Local Disk (C)

 

I tried o remove and re-install inventor fusion 2013 and set up DirectX 2009, 2010, 2011 and the problem still apear,  But the Inventor profissional 2013 work better

 

Thank you

Member
sourabh.roy
Posts: 5
Registered: ‎07-12-2012
Message 2 of 7 (2,683 Views)

Re: inventor fusion 2013 Runtime Error! Please repair or reinstall the program.

07-23-2012 06:26 AM in reply to: amro.samy93

Hi,

 

I recently installed Inventor fusion 2013 and I am also facing the same error like you faced.

 

I am wondering, if you managed to resolve that issue. If yes, could you please share it with me.

 

Regards,

 

Roy

Active Member
lopui
Posts: 6
Registered: ‎10-15-2012
Message 3 of 7 (2,433 Views)

Re: inventor fusion 2013 Runtime Error! Please repair or reinstall the program.

10-15-2012 10:18 AM in reply to: amro.samy93
  • I have the same problem. Have anyone had the solution or direct me to the link to get it resolved?
Board Manager
Phil.E
Posts: 379
Registered: ‎06-29-2012
Message 4 of 7 (2,420 Views)

Re: inventor fusion 2013 Runtime Error! Please repair or reinstall the program.

10-16-2012 09:46 AM in reply to: lopui

See if this helps:

http://forums.autodesk.com/t5/AutoCAD-LT/Display-Driver-not-responding/td-p/3080068

 

This refers to a different product, but the video card is the same. It's worth a try to just turn off Aero.



Phil Eichmiller
Software QA Engineer
Fusion Quality Assurance Team
Autodesk, Inc.

New Member
kevin.oehler
Posts: 2
Registered: ‎09-23-2013
Message 5 of 7 (1,190 Views)

Re: inventor fusion 2013 Runtime Error! Please repair or reinstall the program.

09-23-2013 10:36 AM in reply to: amro.samy93

I keep getting a runtime error too ... this just started happening like two weeks ago.

Has anyone found a solution to this yet? I really hope AutoDESK gets a FIX out ASAP.

Board Manager
Phil.E
Posts: 379
Registered: ‎06-29-2012
Message 6 of 7 (1,186 Views)

Re: inventor fusion 2013 Runtime Error! Please repair or reinstall the program.

09-23-2013 10:43 AM in reply to: kevin.oehler

Thanks for the reply. It sounds like you were running fine until a couple weeks ago. Perhaps there was an update in that time frame?

 

Go to Start > type in View installed updates, and open the page for installed updates. You should see everything in chronological order. Please let us know what you find.

 

Thanks,



Phil Eichmiller
Software QA Engineer
Fusion Quality Assurance Team
Autodesk, Inc.

New Member
kevin.oehler
Posts: 2
Registered: ‎09-23-2013
Message 7 of 7 (1,180 Views)

Re: inventor fusion 2013 Runtime Error! Please repair or reinstall the program.

09-23-2013 02:40 PM in reply to: Phil.E
I figured it out, I added a monitor a few weeks ago which somehow enabled a second graphics driver. I guess it changed the default for Inventor because I went to NVIDIA control panel and made the Inventor.exe application file run from an alternative graphics option, and everything seems to work now.

Kevin
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.