Inventor Fusion

Inventor Fusion

Reply
Active Contributor tim
Active Contributor
tim
Posts: 37
Registered: ‎10-10-2012
Message 1 of 7 (487 Views)

Find Features using Fusion

487 Views, 6 Replies
10-17-2012 08:07 PM

Greetings,

I am having trouble using the Find Features tool in fusion on an Inventor assembly.  The model uses lots of frame generated parts like i-beams etc.  I want to remove the corner radii on the i-beams for use in autodesk simulation mechanical.

 

Can anyone suggest how i do this?  I have used the tutorial and had no trouble with the sample files.

 

I have tried saving the inventor file as step, igs or as the native .iam.  None of this works!

Employee
SallyYang
Posts: 115
Registered: ‎07-31-2012
Message 2 of 7 (483 Views)

Re: Find Features using Fusion

10-17-2012 08:44 PM in reply to: tim

Hi Tim,

 

Could you share us the file that can help to reproduce this issue?  Thank you!

Regards,
Sally



Sally Yang
Software QA Engineer
Fusion 360 Quality Assurance Team
Autodesk, Inc.
Active Contributor tim
Active Contributor
tim
Posts: 37
Registered: ‎10-10-2012
Message 3 of 7 (476 Views)

Re: Find Features using Fusion

10-17-2012 09:47 PM in reply to: SallyYang

Sally,

the file is 2-6 Mb which is too big to send.  Can you send me a ftp link so I can send it?

Employee
SallyYang
Posts: 115
Registered: ‎07-31-2012
Message 4 of 7 (474 Views)

Re: Find Features using Fusion

10-17-2012 09:50 PM in reply to: tim

Could you send it through email: sally.yang@autodesk.com ?

Regards,
Sally



Sally Yang
Software QA Engineer
Fusion 360 Quality Assurance Team
Autodesk, Inc.
Employee
SallyYang
Posts: 115
Registered: ‎07-31-2012
Message 5 of 7 (470 Views)

Re: Find Features using Fusion

10-17-2012 10:27 PM in reply to: tim

The steps to find features like fillet, then remove corner radii.

1. Set selection filter to bodies

2. Select a body in canvas

3. Call Find feature

4. Goto browser and delete fillets (as we haven't support "Find in Browser" in TP1, you need scroll the browser to find the node with underscore shadow)

 

Please see attached video for detail. as it's too big, I just send it through email.

 

Regards,
Sally



Sally Yang
Software QA Engineer
Fusion 360 Quality Assurance Team
Autodesk, Inc.
Active Contributor tim
Active Contributor
tim
Posts: 37
Registered: ‎10-10-2012
Message 6 of 7 (466 Views)

Re: Find Features using Fusion

10-17-2012 10:56 PM in reply to: tim

Sally, thanks.  Does this mean we have to do one body at a time?

 

Is there an easier way to do this within asm?  As I said earlier, I'm trying to mesh this model without fillets etc

Employee
SallyYang
Posts: 115
Registered: ‎07-31-2012
Message 7 of 7 (453 Views)

Re: Find Features using Fusion

10-18-2012 12:09 AM in reply to: tim

Hi Tim,

 

You can multi-select bodies by window select and find all the fillet features in these bodies. However you cannot delete these fillets at one time, as you have to select the fillets manually. And so far as I know, you probably cannot mesh this model without fillets directly in Fusion.

Regards,
Sally



Sally Yang
Software QA Engineer
Fusion 360 Quality Assurance Team
Autodesk, Inc.
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.