Inventor Fusion

Active Member
Posts: 9
Registered: ‎02-19-2013
Message 1 of 3 (226 Views)

Center of a cylinder

226 Views, 2 Replies
02-20-2013 12:50 PM

How can I position, or find the dimension to, the center of a cylindrical object? The only constraint that pops up with the assemble command is tangency. Trying to remember the radius and add it to the offset seems like a kludge.

Board Manager
Posts: 304
Registered: ‎06-29-2012
Message 2 of 3 (213 Views)

Re: Center of a cylinder

02-22-2013 11:39 AM in reply to: kurt_steinke

Can you send a screen shot and/or data set?

Phil Eichmiller
Software QA Engineer
Fusion Quality Assurance Team
Autodesk, Inc.

Active Member
Posts: 9
Registered: ‎02-19-2013
Message 3 of 3 (210 Views)

Re: Center of a cylinder

02-22-2013 01:50 PM in reply to: kurt_steinke

I figured it out. The "Align" option references the center of a cylinder relative to a plane (I don't know whether it works relative to a line or edge, though).


It would be REALLY nice if I could print a comprehensive manual. I can read MUCH faster than the videos can load, and that's IF I can guess the right name (or icon) of the function I'm trying to perform.


I think I've figured out how to place a hole and have it stay on the part. The problem occurs when the dimension to an edge is less than a whole unit (e.g. .5 in). When I type the decimal point, the location of the hole snaps to the edge (offset of 0), and then, more often than not, when I type the following digit, the hole moves that far OUTSIDE the part regardless of whether I input a leading minus sign. The "workaround" is to type the first digit very quickly after the decimal point, before the hole snaps to the edge of the part. Thanks,Kurt

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.