Installation & Licensing

Installation & Licensing

Reply
Product Support
278 Posts
31 Kudos
Registered: ‎10-07-2008
Post 11 of 34

Re: Unable to Install ACAD 2012

04-06-2011 11:42 AM in reply to: pscheu

The issue here probably relates to the VBScript engine registration.

 

1.open DOS command line as administrator:
Start Menu -> All Programs -> Accessories Right click on Command Prompt and select Run as administrator
2.run following command:
 reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8}" /f
3.then run the command below:
c:\windows\syswow64\regsvr32 vbscript.dll
4.start installing ACAD 2012 from the installation media

 

Regards,

 



Avto Chachava
Autodesk Product Support
Autodesk, Inc.
New Member
2 Posts
0 Kudos
Registered: ‎08-04-2010
Post 12 of 34

Re: Unable to Install ACAD 2012

04-06-2011 10:39 PM in reply to: avto

thanks.

the good old command prompt.

installation acad architecture 2012 ok!

Active Contributor
43 Posts
0 Kudos
Registered: ‎06-30-2006
Post 13 of 34

Re: Unable to Install ACAD 2012

04-07-2011 12:35 AM in reply to: FranzPlötzl8918

I have the same problem, but the key dont exist.

I found the Key in HKEY_LOCAL_MACHINE, but but i haven't permissions to do something (as Administrator too)

screenshot attached.

 

 

Product Support
278 Posts
31 Kudos
Registered: ‎10-07-2008
Post 14 of 34

Re: Unable to Install ACAD 2012

04-07-2011 01:58 PM in reply to: s.hofer

If you do not have that key under HKCU\SOFTWARE\Classes\Wow6432Node\CLSID, then open the command prompt as admin and run the command below.

 

c:\windows\syswow64\regsvr32 vbscript.dll

 

and start installing ACAD 2012.

 

Regards,

 



Avto Chachava
Autodesk Product Support
Autodesk, Inc.
Active Contributor
43 Posts
0 Kudos
Registered: ‎06-30-2006
Post 15 of 34

Re: Unable to Install ACAD 2012

04-07-2011 11:06 PM in reply to: avto

Yes, i did, but this dont help...

 

I select Autocad only - the install start until 3/7 left, and then back to 4/7 -> 5/7, and abort.

 

best install progress is attached, and  a screenshot with System informations.

New Member
1 Posts
0 Kudos
Registered: ‎04-29-2011
Post 16 of 34

Unable to Install Autocad LT 2012

04-29-2011 05:42 AM in reply to: pscheu

Hi,

 

I am unable to install Autocad LT 2012 silently.

Could anyone be able to help on this.

Employee
126 Posts
15 Kudos
Registered: ‎04-12-2010
Post 17 of 34

Re: Unable to Install ACAD 2012

07-20-2011 06:40 AM in reply to: pscheu

Hi,

 

Since you've verified that the issue is not due to the WSH, please try the suggestion at:

 

http://forums.autodesk.com/t5/Installation-Licensing/Install-error-2738-Could-not-access-VBScript-ru...

 

This might help.

 

Cheers,

Alison

 

___________________________________________________________

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!



Alison Gangler
IPG - ICP Install Engineer
Autodesk, Inc.

Active Contributor
43 Posts
0 Kudos
Registered: ‎06-30-2006
Post 18 of 34

Re: Unable to Install ACAD 2012

07-20-2011 10:32 PM in reply to: s.hofer
New Member
1 Posts
0 Kudos
Registered: ‎08-04-2011
Post 19 of 34

Re: Unable to Install ACAD 2012

08-04-2011 01:27 PM in reply to: s.hofer

I am running into this same issue, but am having no luck following all of the options.  I have tried the following so far.

 

Reregistered the vbscrip.dll as well as attempted to delete the reg key (it was not present)

I have uninstalled .net and let the installation install it

I have copied the contents of the DVD to the hard drive and installed from there.

 

I have done all of this with administrative rights, and done the command prompt work from an administrator command prompt and so far I get the same error every time.  Here is a post from the Log.

 

2011/8/4:10:01:16 Caroline CAROLINE-PC === Setup started on CAROLINE-PC by Caroline ===
2011/8/4:10:01:16 Caroline CAROLINE-PC Launch
2011/8/4:10:01:56 Caroline CAROLINE-PC === Setup ended ===

2011/8/4:10:01:16 Caroline CAROLINE-PC === Setup started on CAROLINE-PC by Caroline ===
2011/8/4:10:01:16 Caroline CAROLINE-PC Launch
2011/8/4:10:01:58 Caroline CAROLINE-PC PageOpen LaunchDialog  
2011/8/4:10:02:15 Caroline CAROLINE-PC PageOpen LicenseDialog  
2011/8/4:10:02:19 Caroline CAROLINE-PC PageOpen ProductInfoDialog  
2011/8/4:10:02:31 Caroline CAROLINE-PC PageOpen ProductSelectionDialog2  
2011/8/4:10:02:34 Caroline CAROLINE-PC PageOpen FullProgressDialog  
2011/8/4:10:02:34 Caroline CAROLINE-PC Installing .NET Framework Runtime 4.0: C:\Users\Caroline\Desktop\AutoCad Disk\3rdParty\NET\4\wcu\dotNetFramework\dotNetFx40_Full_x86_x64.exe /q
2011/8/4:10:06:54 Caroline CAROLINE-PC Install .NET Framework Runtime 4.0 Succeeded 
2011/8/4:10:06:54 Caroline CAROLINE-PC Installing DirectX Runtime: C:\Users\Caroline\Desktop\AutoCad Disk\3rdParty\DirectX\DXSETUP.exe /silent
2011/8/4:10:07:39 Caroline CAROLINE-PC Install DirectX Runtime Succeeded 
2011/8/4:10:07:39 Caroline CAROLINE-PC Installing Autodesk Material Library 2012:   ADSK_EULA_STATUS=#1 ADSK_SOURCE_ROOT="C:\Users\Caroline\Desktop\AutoCad Disk\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2011/8/4:10:07:52 Caroline CAROLINE-PC Install Autodesk Material Library 2012 Succeeded 
2011/8/4:10:07:52 Caroline CAROLINE-PC Installing Autodesk Material Library 2012 - Low Resolution:   ADSK_EULA_STATUS=#1 ADSK_SOURCE_ROOT="C:\Users\Caroline\Desktop\AutoCad Disk\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2011/8/4:10:09:19 Caroline CAROLINE-PC Install Autodesk Material Library 2012 - Low Resolution Succeeded 
2011/8/4:10:09:20 Caroline CAROLINE-PC Installing AutoCAD® 2012:  TRANSFORMS="C:\Users\Caroline\Desktop\AutoCad Disk\x64\en-us\acad\acad.mst;C:\Users\Caroline\AppData\Local\Temp\_AIE1F5.tmp\x64\acad\acad-standalone.mst" MSINEWINSTANCE=1 ADSK_EULA_STATUS=#1 ADSK_SOURCE_ROOT="C:\Users\Caroline\Desktop\AutoCad Disk\" INSTALLDIR="C:\Program Files\Autodesk\AutoCAD 2012 - English\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2011/8/4:10:18:13 Caroline CAROLINE-PC Install AutoCAD® 2012 Failed Installation aborted, Result=1603
2011/8/4:10:18:41 Caroline CAROLINE-PC Rollback Autodesk Material Library 2012 - Low Resolution Succeeded 
2011/8/4:10:19:10 Caroline CAROLINE-PC Rollback Autodesk Material Library 2012 Succeeded 
2011/8/4:10:19:10 Caroline CAROLINE-PC Rollback DirectX Runtime Failed Failure is ignored, Result=1619
2011/8/4:10:19:10 Caroline CAROLINE-PC Rollback .NET Framework Runtime 4.0 Failed Installation aborted, Result=1619

 

 

Hope someone can help on this, the problem seems to be system specific, but I just can't find an answer.

Employee
126 Posts
15 Kudos
Registered: ‎04-12-2010
Post 20 of 34

Re: Unable to Install ACAD 2012

08-04-2011 01:42 PM in reply to: JTWrenn

Hi,

 

If you are able to upload the AutoCAD 2012 Install log, not the setup.log, I will be happy to analyze it for you.

 

Thank you,

Alison

 

___________________________________________________________

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!



Alison Gangler
IPG - ICP Install Engineer
Autodesk, Inc.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!