Installation & Licensing

Installation & Licensing

Reply
Member
ErnestMaicle
Posts: 4
Registered: ‎09-13-2010
Message 1 of 12 (5,387 Views)

Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

5387 Views, 11 Replies
09-13-2010 12:57 AM

with the ff. error:

 

adskflex: The desired vendor daemon is down.
 Check the lmgrd log file, or try lmreread.
Vendor:Host:   <server name>
License path:  27000@<server name>
FLEXnet Licensing error:-97,121
For further information, refer to the FLEXnet Licensing documentation,
available at "www.acresso.com".

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 2 of 12 (5,386 Views)

Re: Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

09-13-2010 01:19 AM in reply to: ErnestMaicle

Please check the log file there must be more error, refering to the license file,system name etc..

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Member
ErnestMaicle
Posts: 4
Registered: ‎09-13-2010
Message 3 of 12 (5,365 Views)

Re: Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

09-13-2010 08:13 PM in reply to: hashim.mundol

I finally got the Service running but I got the following errors on my log file:

 

12:39:36 (lmgrd) World Wide Web:  http://www.acresso.com

12:39:36 (lmgrd) License file(s): C:\Program Files\Autodesk Network License Manager\Hofschneider Eng All 2010.lic

12:39:36 (lmgrd) lmgrd tcp-port 27000

12:39:36 (lmgrd) Starting vendor daemons ...

12:39:36 (lmgrd) Starting vendor daemon at port 2080

12:39:36 (lmgrd) Using vendor daemon port 2080 specified in license file

12:39:36 (lmgrd) Started adskflex (pid 3740)

12:39:37 (adskflex) Unable to initialize access to trusted storage: 1

12:39:37 (adskflex) FLEXnet Licensing version v11.7.0.1 build 79956 i86_n3

12:39:37 (adskflex) Server started on server.hofschneider.com for:    

12:39:37 (adskflex) 64300ACD_F (consisting of:        85536ACD_2011_0F

12:39:37 (adskflex) 71200ACD_2010_0F 57600ACD_2009_0F 54600ACD_2008_0F)

12:39:37 (adskflex) 64900CIV3D_F (consisting of:        85604CIV3D_2011_0F

12:39:37 (adskflex) 73700CIV3D_2010_0F 59700CIV3D_2009_0F 55400CIV3D_2008_0F)

12:39:37 (adskflex) PLIST        PLIST        

12:39:37 (adskflex) Wrong hostid on SERVER line for license file:

12:39:37 (adskflex)     C:\Program Files\Autodesk Network License Manager\Hofschneider Eng All 2010.lic

12:39:37 (adskflex) SERVER line says 033048b9ea21, hostid is "003048b9ea21 003048b9ea20"

12:39:37 (adskflex) Invalid hostid on SERVER line

12:39:37 (adskflex) Disabling 3 licenses from feature 54600ACD_2008_0F(12ED 3A4E 6073 47BD )

12:39:37 (adskflex) Disabling 1 license from feature 55400CIV3D_2008_0F(1B1C 5792 4355 1366 )

12:39:37 (adskflex) Disabling 3 licenses from feature 57600ACD_2009_0F(12ED 3A4E 6073 47BD )

12:39:37 (adskflex) Disabling 1 license from feature 59700CIV3D_2009_0F(1B1C 5792 4355 1366 )

12:39:37 (adskflex) Disabling 3 licenses from feature 64300ACD_F(12ED 3A4E 6073 47BD )

12:39:37 (adskflex) Disabling 1 license from feature 64900CIV3D_F(1B1C 5792 4355 1366 )

12:39:37 (adskflex) Disabling 3 licenses from feature 71200ACD_2010_0F(12ED 3A4E 6073 47BD )

12:39:37 (adskflex) Disabling 1 license from feature 73700CIV3D_2010_0F(1B1C 5792 4355 1366 )

12:39:37 (adskflex) Disabling 3 licenses from feature 85536ACD_2011_0F(12ED 3A4E 6073 47BD )

12:39:37 (adskflex) Disabling 1 license from feature 85604CIV3D_2011_0F(1B1C 5792 4355 1366 )

12:39:37 (adskflex) Disabling 1 license from feature PLIST(0D32 031D 42E3 F079 )

12:39:37 (adskflex) Disabling 1 license from feature PLIST(0D90 C204 D42B 26D3 )

12:39:37 (adskflex) EXTERNAL FILTERS are OFF

12:39:37 (lmgrd) adskflex using TCP-port 2080

12:39:37 (adskflex) No valid hostids, exiting

12:39:37 (adskflex) EXITING DUE TO SIGNAL 25 Exit reason 2

12:39:37 (lmgrd) adskflex exited with status 25 (Invalid host)

12:39:37 (lmgrd) Please correct problem and restart daemons

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 4 of 12 (5,359 Views)

Re: Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

09-13-2010 11:28 PM in reply to: ErnestMaicle

is this a teamed network interface. system seem to report wrong mac address ?

doest ipconfig /all report the mac address right ?

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Member
ErnestMaicle
Posts: 4
Registered: ‎09-13-2010
Message 5 of 12 (5,354 Views)

Re: Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

09-14-2010 12:49 AM in reply to: hashim.mundol

What do you mean teamed network interface?

 

I have my license file for Autodesk regular and Autodesk 3D in one license file. I actually had it working for a long time using version 2010 for both. Now I was tasked to upgrade it to our 2011 version, and so what I did was to uninstall the NLM 2010 and installed NLM 2011. I acquired a license file and did the same procedure when I did 2010. Unfortunately, I didn't have it working. I got frustrated and uninstalled 2011 and put back 2010 but to same result. Now even my 2010 is not working.

 

By the way, I am using Server 2003.

 

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 6 of 12 (5,352 Views)

Re: Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

09-14-2010 01:03 AM in reply to: ErnestMaicle

If possible try to disable the network interface with the Mac ID :003048b9ea20

 

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

Member
ErnestMaicle
Posts: 4
Registered: ‎09-13-2010
Message 7 of 12 (5,302 Views)

Re: Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

09-17-2010 10:17 PM in reply to: ErnestMaicle

I already was able to resolve the Services on my MS 2003 server. But I still have problems with my NLM. I am getting errors on my log file. and I am getting a lot of these invalid license key error(s). Should I acquire a new license file? Please help.

 

LOG FILE ERRORS:

14:26:54 (lmgrd) FLEXnet Licensing (v11.7.0.0 build 73797 i86_n3) started on server.hofschneider.com (IBM PC) (9/18/2010)
14:26:54 (lmgrd) Copyright (c) 1988-2009 Acresso Software Inc. All Rights Reserved.
14:26:54 (lmgrd) US Patents 5,390,297 and 5,671,412.
14:26:54 (lmgrd) World Wide Web:  http://www.acresso.com
14:26:54 (lmgrd) License file(s): C:\Program Files\Autodesk Network License Manager\hofschneider.lic
14:26:54 (lmgrd) lmgrd tcp-port 27000
14:26:54 (lmgrd) Starting vendor daemons ...
14:26:54 (lmgrd) Starting vendor daemon at port 2080
14:26:54 (lmgrd) Using vendor daemon port 2080 specified in license file
14:26:54 (lmgrd) Started adskflex (pid 1792)
14:26:54 (adskflex) Unable to initialize access to trusted storage: 1
14:26:54 (adskflex) FLEXnet Licensing version v11.7.0.1 build 79956 i86_n3
14:26:54 (adskflex) Invalid license key (inconsistent authentication code)
14:26:54 (adskflex)     ==>INCREMENT 64300ACD_F adskflex 3.000 permanent 3 \
    VENDOR_STRING=commercial:smileytongue:ermanent SUPERSEDE DUP_GROUP=UH \
    SUITE_DUP_GROUP=UHV ISSUED=08-Sep-2010 BORROW=4320 \........................

Product Support
hashim.mundol
Posts: 1,458
Registered: ‎05-21-2010
Message 8 of 12 (5,251 Views)

Re: Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

09-21-2010 01:05 AM in reply to: ErnestMaicle

if you havent made any changes to the license file received from autodesk and if the mac address is the same it should work.

 

if you modified any of those, its best to get a new file.

---------------------------------------------------------------------------------------
If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!
For more tips & tricks: http://upandready.typepad.com



Hashim Mundol
Autodesk Product Support
Autodesk, Inc.

New Member
poltorakja
Posts: 1
Registered: ‎12-14-2011
Message 9 of 12 (3,101 Views)

Re: Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

12-14-2011 11:16 AM in reply to: hashim.mundol

How do you request a new .lic.  We had a NIC go bad and swapped it out so the MAC Address did change.  We are using Autocad 2011

*Expert Elite*
DarrenP
Posts: 7,664
Registered: ‎09-13-2007
Message 10 of 12 (3,097 Views)

Re: Service Created by Autocad 2011 NLM Doesn't Start in Server 2003

12-14-2011 11:38 AM in reply to: poltorakja

To Obtain a license file:

Contact the Autodesk Registration and Authorization office and provide the following information: 1-800-551-1490 or authcodes@autodesk.com you need:

  • Product serial number(s)
  • Server name
  • Host ID (Ethernet Address)
  • An email address where Autodesk can send the license file.

to set up the license manager: http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=14379546&linkID=9240617

 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.