Installation & Licensing

Installation & Licensing

Reply
Active Member
choicefotos.perth
Posts: 7
Registered: ‎08-11-2012
Message 1 of 15 (235 Views)

Revit architecture will not install

235 Views, 14 Replies
03-26-2013 06:19 AM

I have tried twice to install Revit I am totally confused 

It comes up stating some products have not installed.

attached is the installation log, my system requirements are correct etc

Active Member
choicefotos.perth
Posts: 7
Registered: ‎08-11-2012
Message 2 of 15 (234 Views)

Re: Revit architecture will not install

03-26-2013 06:21 AM in reply to: choicefotos.perth

My system I am running

 

64bit windows 8

I also have installed auto CAD 2d also solid works

Employee
DannyHubbard
Posts: 299
Registered: ‎05-17-2007
Message 3 of 15 (201 Views)

Re: Revit architecture will not install

03-27-2013 06:44 AM in reply to: choicefotos.perth

Revit 2012 is not supported on Windows 8, http://usa.autodesk.com/getdoc/id=TS14026408, but you might try Travis's previous post http://forums.autodesk.com/t5/Installation-Licensing/AutoCAD-2013-Suite-failed-installation-aborted-....

 

Thanks,

Danny



Danny Hubbard
QA Analyst
Autodesk, Inc.
*Expert Elite*
TravisNave
Posts: 10,499
Registered: ‎01-14-2005
Message 4 of 15 (196 Views)

Re: Revit architecture will not install

03-27-2013 08:01 AM in reply to: choicefotos.perth

Actually, your product is failing to install because the prerequiste program required by the installer is newer than the version being installed. Please uninstall the prerequisite program causing the issue and run your installer again. Uninstall the version that shows the error at the end of your log file.

For more information about this process, please see my KB link here:

http://forums.autodesk.com/t5/Installation-Licensing/Some-Products-Fail-to-Install-Result-1603/td-p/...

Good Luck!

Active Member
choicefotos.perth
Posts: 7
Registered: ‎08-11-2012
Message 5 of 15 (193 Views)

Re: Revit architecture will not install

03-27-2013 08:21 AM in reply to: TravisNave
could you give me a hint on what i need to uninstall and then reinstall
*Expert Elite*
TravisNave
Posts: 10,499
Registered: ‎01-14-2005
Message 6 of 15 (189 Views)

Re: Revit architecture will not install

03-27-2013 08:29 AM in reply to: choicefotos.perth
Microsoft Visual C++ 2010 Redistributable (x86)

 Uninstall that from Control Panel.  Then run the Autodesk installer.  Let it try to install it.  If it fails, install it manually from Microsoft and see if that helps.

Active Member
choicefotos.perth
Posts: 7
Registered: ‎08-11-2012
Message 7 of 15 (185 Views)

Re: Revit architecture will not install

03-27-2013 08:35 AM in reply to: TravisNave
thanks I will give it a go
Active Member
bethannt31
Posts: 6
Registered: ‎03-27-2013
Message 8 of 15 (176 Views)

Re: Revit architecture will not install

03-27-2013 06:44 PM in reply to: choicefotos.perth

I am having the same problem and will try uninstalling the Microsoft Visual C++ 2010 as you suggested.  Will I need to reinstall that after Revit successfully installs (I hope)?

Active Member
choicefotos.perth
Posts: 7
Registered: ‎08-11-2012
Message 9 of 15 (173 Views)

Re: Revit architecture will not install

03-27-2013 06:50 PM in reply to: bethannt31
It defiantly worked for me good luck
Active Member
bethannt31
Posts: 6
Registered: ‎03-27-2013
Message 10 of 15 (173 Views)

Re: Revit architecture will not install

03-27-2013 06:53 PM in reply to: choicefotos.perth
OK, so you uninstalled the Microsoft Visual program, then ran the Autodesk Revit install again? Do we need the Visual Programafter that?
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.