Installation & Licensing

Installation & Licensing

Reply
Member
dannelson2000
Posts: 5
Registered: ‎04-21-2012
Message 1 of 10 (4,303 Views)
Accepted Solution

Revit 2013 Install Hangs

4303 Views, 9 Replies
04-21-2012 06:02 PM

I am trying to install Revit 2013 on a windows 7 machine that meets all the requirements, I have updated everything, and stopped the antivirus, but the install still hangs.

 

I have attached the install log and would appreciate help with suggestions. Thanks.

 

I've seen it go twice as long as that sometimes.  Try letting it run overnight just as a test.  If it isn't installed in the morning, you have issues.  :-D

*Expert Elite*
TravisNave
Posts: 10,269
Registered: ‎01-14-2005
Message 2 of 10 (4,278 Views)

Re: Revit 2013 Install Hangs

04-22-2012 10:15 AM in reply to: dannelson2000

Have you tried just waiting it out? 

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
Member
dannelson2000
Posts: 5
Registered: ‎04-21-2012
Message 3 of 10 (4,272 Views)

Re: Revit 2013 Install Hangs

04-22-2012 01:43 PM in reply to: TravisNave

I have let it run probablly about 3 hours. I would expect that it should install within that time.

 

Does what you see in the log file suggest that it is still going but is just slow?

 

 

*Expert Elite*
TravisNave
Posts: 10,269
Registered: ‎01-14-2005
Message 4 of 10 (4,270 Views)

Re: Revit 2013 Install Hangs

04-22-2012 01:48 PM in reply to: dannelson2000

I've seen it go twice as long as that sometimes.  Try letting it run overnight just as a test.  If it isn't installed in the morning, you have issues.  :-D

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
Active Member
RBG-UK-CAD
Posts: 6
Registered: ‎04-23-2012
Message 5 of 10 (4,239 Views)

Re: Revit 2013 Install Hangs

04-23-2012 06:57 AM in reply to: dannelson2000

Hi there,I've had this issue and this is what i did, First make sure you have internet access and that the Proxy is set correctly (If you use a proxy server try giving the machine full outbound) and try to run the install with an admin account.

 

Member
dannelson2000
Posts: 5
Registered: ‎04-21-2012
Message 6 of 10 (4,203 Views)

Re: Revit 2013 Install Hangs

04-23-2012 10:19 PM in reply to: TravisNave

I ran it over night and it was installed by morning. Phew!

 

Thanks for your help!

Active Member
gpktm
Posts: 12
Registered: ‎10-06-2011
Message 7 of 10 (4,076 Views)

Re: Revit 2013 Install Hangs

04-27-2012 07:08 PM in reply to: dannelson2000

So the solution is what? To wait for 8 hours to install a program?

Member
dannelson2000
Posts: 5
Registered: ‎04-21-2012
Message 8 of 10 (4,073 Views)

Re: Revit 2013 Install Hangs

04-27-2012 09:37 PM in reply to: gpktm

In my case yes.

*Expert Elite*
TravisNave
Posts: 10,269
Registered: ‎01-14-2005
Message 9 of 10 (4,071 Views)

Re: Revit 2013 Install Hangs

04-27-2012 09:46 PM in reply to: dannelson2000

Good answer.  :smileyvery-happy:

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
New Member
towngirl
Posts: 1
Registered: ‎03-15-2014
Message 10 of 10 (647 Views)

revit 2013 - how to fix the tool" mode"

03-15-2014 06:44 AM in reply to: dannelson2000

well,I also has the pronlem with revit 2013.

when I click " extrusion" and finish drawing a square, it doest show any hint in the tool bar as" MODE",which has the tick meaning OK.!!

Just hope someone can help me fix.....thx a lot

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.